Electric fireplace installation for Tallulah-North Shore homes

A flush, level, working electric fireplace in your Tallulah-North Shore room, installed under our 100% satisfaction guarantee.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local electric fireplace pros for Tallulah-North Shore homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Old units are taken out and hauled away as part of a replacement.

Free inspection and estimateThe wall and circuit at your Tallulah-North Shore home are checked against the unit's manual at no charge.
100% satisfaction guaranteedA unit left crooked, loose or not working to its manual gets a return visit and a fix at no cost.
Family owned and operatedThe family crew that measures your wall is the one that mounts the unit, so nothing gets lost between visits.

Call (904) 920-5495 Free Inspection

Hiding the cord

Nothing spoils a new fireplace like a cord hanging down the wall. The fix depends on the unit and the wall: an outlet placed behind the unit, a cord routed inside the recess, or a path the manual allows through a firebox side. The last step is a check that the cord is not pinched once the unit is pushed home.

Manuals set limits on how cords may run, and we follow them, keeping cords out from under rugs and away from pinch points. Where an outlet has to move, an electrician moves it. Want a clean, cord-free look for a fireplace in Tallulah-North Shore? Phone (904) 920-5495 and book a free planning visit.

Tallulah-North Shore is one of the named neighborhoods of Jacksonville. Tallulah-North Shore falls within Duval County.

Electric fireplace installs we do in Tallulah-North Shore

Recessed openings framed to the manual's rough size
Cords routed out of sight, never on extensions
Old units removed and hauled away
Heater run and cycle checked before we leave

Call (904) 920-5495 Free Inspection

How electric fireplace installation runs

Manual read in advance
Send the model number, and the installation section is read before we arrive.
Wall and circuit checked
Studs, wall contents, clearances and the circuit are checked against the manual.
Mounted, framed or inserted
The unit is hung, set into a framed recess or placed in a prepared firebox, with electrician work done in sequence.
Tested and handed over
Flame, heat, remote and cycling are tested with you, and the controls explained.

Televisions and fireplaces in Tallulah-North Shore

Putting a screen near an electric fireplace is about the heater outlet's clearance, not the town.

We lay out the wall in Tallulah-North Shore so both sit within the manual's limits.

10% off any service booked within 72 hours of inspection

A wall-hung unit or an electric insert, either install comes 10% off.

Call (904) 920-5495 Free Inspection

An old gas line capped first

Some fireplaces being converted to electric once had gas, and a pipe or valve key may still be in the firebox or the wall beside it. That line is capped by a gas contractor before any electric insert goes in.

We do not touch the gas line. The estimate names the capping as a separate step, with who does it, and the insert is scheduled after it. The cord route is then planned so it stays clear of the capped fitting, and the capped line is noted on the paperwork for anyone who works on the fireplace later. Where there is doubt about whether a line is live, the gas contractor confirms it before we start.

Routing the cord the manual allows

Manuals set rules for power cords: no running under rugs or carpets, no pinching behind heavy objects and no routes that leave the cord where it could be damaged. For inserts, the manual may show a path through the side of the firebox opening.

We follow those rules and aim for a cord that cannot be seen. Any gap the cord crosses gets protection, and an outlet sitting where the cord cannot reach is moved by an electrician. The route we use is shown to you at handover, so you know where the cord is if the unit ever needs to come out. Cords are never pulled tight around corners or pinned under the unit's feet.

Testing everything before we leave

An installation is finished when the unit works as the manual says. We run the flame effect through its settings, run the heater long enough to watch it cycle, test the remote and thermostat and confirm the unit is secure and level.

For inserts, we check that the flue closure holds and the trim sits tight. For recessed units, we check the trim gaps and the airflow paths. You see each test, and any fault is dealt with before we pack up. The manual and any warranty card from the maker stay with you. We also show you how to switch the unit off completely for cleaning or a long absence.

What we check on the wall in Tallulah-North Shore

Installation method: wall mount, framed recess or firebox insert
Old gas line capped by a gas contractor, named in writing
Cord route that follows the manual and stays out of sight
Cleanup of dust and packaging before we leave

Before the unit goes in

Will I need a new circuit?

It depends on the unit's rating label, its manual and what else is on the circuit. If a dedicated circuit is needed, an electrician adds it, shown as its own item.

Can the fireplace go on the same wall as my television?

Often, within the clearances the manual gives for objects near the heater outlet. We check which way your model blows its heat and lay out the wall so both fit.