Local chimney inspection in Sunbeam
Every flue in the stack and every appliance it serves, inspected free in Sunbeam and explained in plain words.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local inspection experts for Sunbeam homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
When a finding belongs to another trade, it is flagged in writing with who to call.
- Free inspection and estimateThe chimney inspection at your Sunbeam home costs nothing, and a clean result is reported as clean.
- Locally ownedA locally owned business shows you what it sees, so the findings are yours to check.
- No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.
Why findings are explained at the chimney
A written line such as 'crown cracked at the northeast corner' means more once you have seen the crack. So the findings are explained where they are: at the firebox with a light on the back wall, in the attic beside the stack, or from the roof edge where it can be reached safely.
You can ask questions while the thing in question is in front of you, and the written estimate that follows uses the same words you heard on site. Nothing on it should surprise you after the Sunbeam visit. If you cannot be there, the walk-through can happen by phone before the estimate is sent. A free chimney inspection in Sunbeam is one call away at (904) 920-5495.
Within Jacksonville city limits, Sunbeam is its own named neighborhood. Sunbeam is part of Duval County.
The whole system, firebox to cap
- Firebrick and back wall checked for through cracks
- Attic airspace and fireblocking checked where reachable
- Stove connectors and gas vents followed end to end
- Findings for your Sunbeam home explained on site
How our inspection pros check a chimney in Sunbeam
-
The reason noted first
We ask why you want the inspection, whether a sale, a new stove, a storm or a smell, and plan around it.
-
Firebox up to the flue
Firebrick, hearth, damper, smoke chamber and flue tile are checked with a strong light from below.
-
Roof and attic next
Crown, cap, flashing and brick are checked from the roof where safe, and clearances from the attic.
-
Findings explained on site
We go over each finding with you on site, and any repair gets its own price.
What inspections find in Sunbeam
Sunbeam is inland, so salt is less of a factor for its chimneys. Findings here usually come from water through the crown or flashing, deposit in the flue, and wear in the firebox.
The inspection ranks what it finds, with safety items first.
10% off any service booked within 72 hours of inspection
The inspection in Sunbeam is free, and a repair it turns up is 10% off if booked within 72 hours.
Hairline or through-brick cracks in the firebox
Firebrick takes the direct heat of the fire, and fine crazing on its face is normal wear. What matters is a crack that runs through the brick, a joint that has opened, or a back wall that has bulged or loosened. Those let heat reach the masonry behind the firebox, and in some fireplaces the framing beyond it.
Each is noted by location and size. Loose or missing firebrick and failed refractory joints are recorded as firebox repair, and a gap that reaches through to the outer masonry goes to the top of the list. Crazing on its own is simply noted as wear.
Brick and joints above the roofline
Masonry above the roof takes weather on every face. The inspection looks for brick faces that have spalled off, mortar joints worn back from the surface, cracks that step along joints or split through brick, and courses no longer in line with the ones below. Loose brick within reach is tested by hand.
Each finding is sized, because a few damaged bricks and a stack failing on every face lead to different repairs: repointing and brick replacement in the first case, a partial rebuild in the second. The findings say which case the chimney is in. Earlier patches are noted, since they show where trouble started.
Refractory panels in a factory-built firebox
Instead of firebrick, a factory-built fireplace lines its firebox with refractory panels. They crack with heat over time, and the maker's manual sets the limit for replacement, by the crack's width or by whether a piece has come loose. The inspection compares what it sees with that limit.
Panels that have crumbled at the edges, or that show the metal behind them, are marked urgent, since the steel shell of the firebox is not meant to take the fire directly. Replacement panels come from the maker's own parts list for that model, and each one is listed by its part name. Panels are checked with the unit cold and the grate out.
Checked on every inspection in Sunbeam
- Firebrick, mortar joints and back wall checked for cracks that pass through
- Smoke chamber walls examined for gaps, loose courses and deposit
- Crown slope, drip edge and the bond break at the flue looked at
- Stove connector support, joints, pitch and thimble condition recorded
Before your chimney is inspected
Do I get the findings in writing?
Yes. After they are explained on site, anything that needs work is written up on an estimate, one finding per line, with its repair and its urgency.
If the inspection is free, where does the 10% off come in?
The inspection itself costs nothing. If it turns up work and you book that work within 72 hours, 10% comes off the job. Ask for it on the call.
More services in Sunbeam
-
-
-
-
-
-
Learn more about chimney and fireplace inspectionAll services in Sunbeam
A clear picture of your Sunbeam chimney
A family-owned team of inspection professionals checks your Sunbeam fireplace at no charge and explains what it sees.
Free Inspection