Fireplace insert installation for St. Nicholas homes
A listed wood insert for your St. Nicholas fireplace, fitted with a full-length stainless liner after a free check of the fireplace and its flue.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local insert pros who install to the listing
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Whether the surround is sealed depends on the air source, and we follow the manual on it.
- Free inspection and estimateYour St. Nicholas firebox, chimney height and hearth are measured against the insert's manual at no charge, before anything is ordered.
- Upfront pricing, no hidden feesEvery part of the job is priced before ordering, from repairs to the rain cap, and nothing is added without your yes.
- 100% satisfaction guaranteedIf the insert smokes or draws poorly after installation to its manual, we come back and set it right.
Selling a house with an insert
Buyers and their inspectors ask how an insert was installed: whether it has a liner, what it is listed to and what the clearances are. The insert's label, its manual and a written record of the liner and the top plate answer most of those questions.
When we install an insert, the ticket records the model, the liner, its length and size, and the clearances measured, so you have that record ready for a listing file. Getting a house in St. Nicholas ready for sale with an insert in it? We can check the setup; call (904) 920-5495.
St. Nicholas is part of Duval County. St. Nicholas lies inland.
What fireplace insert installation covers in St. Nicholas
- Firebox measured against the insert's size table
- Dampers locked open or removed for the liner
- Model, liner and clearances recorded for your St. Nicholas house
- EPA Step 2 labels checked on every new insert
How our insert pros install a wood insert in St. Nicholas
-
Measure against the manual
Firebox, chimney height, hearth and clearances are checked against the insert's table before ordering.
-
Repair and clean first
Fireplace repairs are made and cured, and the flue is cleaned before the liner goes up.
-
Liner, plate and cap
A listed stainless liner runs to the top, closed with a top plate and a rain cap.
-
Set, seal and fire
The insert and surround go in as the manual directs, and the first fire is run with you.
Hearth depth and an inland insert
Embers, not salt, are the hazard in front of an insert in St. Nicholas, and the manual sets the floor protection that covers them.
We measure your hearth against the figures for your model.
10% off any service booked within 72 hours of inspection
Book on inspection day or two days later, and the insert comes 10% off either way.
Sizing the liner to the collar
The insert collar sets the liner size. One maker's insert uses a 6-inch stainless liner, and its manual shows the liner attached to a stove connector at the insert and running full length above it.
A liner smaller than the collar chokes the insert, and one larger than needed gives slow, cool smoke the same way the old flue did. We confirm the collar size on the unit itself, check that the flue has room for the liner and any insulation the listing calls for, and order to that size. Where the flue is too tight, the estimate says so before the order.
When the surround is sealed to the face
Sealing the surround panels to the fireplace face is not automatic. One maker seals them when the insert draws its air from outdoors, and leaves them unsealed when it draws room air, so enough air reaches the fire through the fireplace cavity.
For a factory-built fireplace, the same maker requires the surround or the damper area around the liner to be sealed so room air does not enter the chimney cavity. We follow the manual of your model and your fireplace type rather than a habit, and the ticket notes how the surround was set so a later service visit leaves it the same way.
Smoke rolling down the glass
Smoke pouring down across the glass is, in one maker's words, the sign that the air control was turned down too soon or set too low. The wood needs time on a high setting to char before the air is reduced, especially after a fresh load.
We show you how the air control works on install day, with a live fire, so the first weeks are not spent guessing. The same maker suggests opening the loading door slowly after the fire has brightened, which prevents a puff of smoke into the room. Both habits keep the glass clearer as well.
Measured in St. Nicholas before an insert is ordered
- The four firebox dimensions set beside the insert maker's size table
- Top plate trimmed, seated and sealed, with a rain cap on the liner
- EPA Step 2 label read and the model and serial number recorded
- Metal tag fixed to the fireplace back wall when the manual supplies one
Before you order an insert
What happens to the damper?
It stays fixed open or comes out entirely, so the liner has a clear path. Some manuals allow trimming parts of the damper frame or smoke shelf, only where the fireplace is not weakened.
Do you sell the insert or only install it?
We install to the insert's listing, and the estimate spells out which parts we supply, from the liner to the cap. Call (904) 920-5495 and tell us whether you already have a model for the fireplace in St. Nicholas.
More services in St. Nicholas
-
-
-
-
-
-
Learn more about wood-burning fireplace insert installationAll services in St. Nicholas
Get more heat from the fireplace in St. Nicholas
A local insert specialist checks the fireplace, flue and hearth in St. Nicholas and writes the full price down.
Free Inspection