Cracked hearths repaired in San Jose by local pros

A hearth that sounds hollow is next to crack. Local pros in San Jose find it by sound, for free.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local hearth repair pros for San Jose homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

A small repair that will hold is priced as the small repair.

Free inspection and estimateYour hearth in San Jose is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

A stone slab with a crack across it

A one-piece stone hearth needs support under its whole area. Set on a few spots of mortar, or on a bed that has shrunk away, it spans the gaps like a plank, and a dropped log or a heavy step can snap it. The break can run straight across, near the middle or near an unsupported corner.

For a slab in San Jose, the choice is between gluing a clean break with a stone epoxy and resetting the slab on a full bed, or replacing it. We tell you which one the stone and its bed allow, and the free inspection covers both.

San Jose is inland. San Jose is a neighborhood inside Jacksonville city limits.

Hearth repair work we take on in San Jose

Sunken or tilted extensions leveled on new support
Stone slabs rebedded, glued or replaced
Wood flooring cut back from the ember zone
Factory-built hearth pads checked against the listing

Call (904) 920-5495 Free Inspection

From the first tap to the first fire in San Jose

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

What wears a hearth in San Jose

San Jose is inland, so salt corrosion is not the concern for the metal at the hearth. What wears a hearth here is inside the house: heat at the opening, dropped logs, cleaning products and a support that moves.

The repair plan in San Jose follows those causes, starting with the base and ending with a finish chosen for the heat.

10% off any service booked within 72 hours of inspection

A hearth in San Jose measured short of code can be extended, and that job is discounted too.

Call (904) 920-5495 Free Inspection

Full contact under every tile

Tile on a hearth is only as strong as the bed under it. A tile set on dabs of adhesive at its corners carries its load on those dabs, and a dropped log cracks it across the gaps. The American National Standards for tile, A108 for installation and A118 for setting materials, set coverage requirements for the mortar under each unit.

On a hearth, that means back-buttering tile and stone, pressing each unit into the bed and lifting one now and then to check the contact. Larger stone pieces get a full mortar bed. It is slower than spot-setting, and it is why tile we set stays solid under a tap.

Level, height and the trip edge

A rebuilt extension has to meet the firebox floor, the finished floor and any doors at workable heights. A hearth set a little proud of the floor makes a trip edge. One set too high can foul glass doors or a screen. We check all three heights before choosing the slab thickness and the tile.

Where the numbers do not work together, the options are a raised hearth, a flush one with the slab set lower, or a small bevel at the front. We draw the section on the ticket, because a quarter inch at the front edge decides how the finished hearth feels underfoot.

Cure time before the first fire

Fresh mortar and setting materials hold water, and heat drives it out too fast. A fire lit on a new bed can crack it or weaken the bond before it has reached strength. Each product's data sheet gives its cure time before heat and traffic, and refractory products carry their own heat-up instructions.

The cure time for your hearth goes on the ticket with the date the work finished. If the hearth has to take foot traffic sooner, we protect it with boards. Planning a gathering around the fireplace? Tell us the date when you book so the schedule allows for it.

Tile, slab, support and size, in writing

Support under the extension identified, from below where access allows
Grout raked and renewed, product and color written down
Seam at the firebox cleaned and refilled with a heat-suited material
Room and floors covered, with dust kept to the work area

Hearth repair questions from San Jose

When can I light a fire on the repaired hearth?

That depends on the setting materials, and each product's data sheet gives a cure time before heat. We write that time on your ticket along with the date the work was finished.

Will you match my stone or tile?

We look for the closest available match first and tell you plainly how close it is. If no match exists, we suggest a salvage spot or a deliberate contrast, and you choose before anything is removed.