Chimney crown repair in Panama Park by local masons

For Panama Park chimneys, a crown that sheds water, sloped and overhanging, with a drip edge and a bond break at the flue. The inspection is free.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Crown repair specialists who seal or recast in Panama Park

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Hairline cracks on a sound slab get sealed, which keeps the job smaller and the price lower.

Free inspection and estimateWe map the cracks on your Panama Park crown and check the brick under it at no charge.
Upfront pricing, no hidden feesCoating and recasting are both priced on paper, so you see the difference before choosing.
100% satisfaction guaranteedIf the finished crown is not right, tell us and we come back to put it right.

Call (904) 920-5495 Free Inspection

The brick under the crown

Months of water through a failed crown leave damage in the brick right under it. The top courses stay wettest, so their joints wash out and their faces flake first. Casting a new crown on top of loose or soft brick gives the new concrete a bad base.

Once the old crown is off, the top courses of your Panama Park chimney are checked by hand. Loose brick is relaid and open joints repointed before the forms go up, and that masonry work is priced separately with the reason beside it. Cracks on top of the chimney in Panama Park? Our masons tell you coat or recast after one look, so call (904) 920-5495.

Panama Park does not reach the coast. Panama Park is a neighborhood inside Jacksonville city limits.

What our crown work covers in Panama Park

Wider cracks filled before a crown coating goes on
Forms set with an overhang past every face of the brick
Crown sloped so water runs off toward the edges
Roof and gutters cleared of crown debris at your Panama Park home

Call (904) 920-5495 Free Inspection

From crack map to cured crown in Panama Park

Crack map from the roof
We identify the type of top and sketch each crack with its width, so the choice between coating and recasting is based on what is there.
Prep for coating or removal
A sound crown is cleaned and its wider cracks filled; a failed one is broken out down to sound brick.
Coat, or form and pour
The coating is brushed on in dry weather, or new concrete goes into forms with an overhang, a drip groove and reinforcement.
Cure, seal and refit the cap
The bond break at each flue is sealed, the concrete cures under cover, and the cap goes back on.

Storm season and chimney crowns in Panama Park

The Atlantic hurricane season runs from June 1 to November 30, and inland crowns in Panama Park still take the wind and the rain. A crown that was cracked before a storm can lose a corner in one.

Pieces of concrete on the roof or in the gutter after a storm are the sign to call. We find the crown they came from and say whether to seal or recast.

10% off any service booked within 72 hours of inspection

Seal or recast, crown repair in Panama Park earns the 10% discount.

Call (904) 920-5495 Free Inspection

Taping the flue tile before a coating

Before a crown is coated, tape goes around each flue tile, set a little higher than the crown surface. The coating is brushed up to that line, over the tile-to-crown joint, and ends in a clean edge instead of a ragged smear.

What sits in the joint where the tile meets the crown matters more than the tape. The bond break the code asks for is a flexible, caulked joint that lets the tile expand as it heats while the concrete stays put. Rigid patching cement packed into it locks the tile to the crown, and the next fire cracks one or the other. An open joint at the tile is cleaned out and resealed with a flexible sealant before the coating goes on.

A flashing sheet under the crown

The Brick Industry Association's details put a sheet of flashing directly under a cast crown, running past the inside of the brick and turned up against the flue tile. The flashing catches any water that gets through the crown and sends it out as a drip beyond the face.

Technical Note 19B highly recommends flashing under cast-in-place caps and notes that it can double as the bond break between crown and brick. We include it where the chimney's construction allows it, and we say whether your crown gets one and why. The flashing metal is chosen to sit in mortar without corroding.

What the yearly check looks for on a crown

Under NFPA 211, a chimney gets a yearly soundness check, and the crown is one of the parts that check looks at closely. We note new cracks, cracks that have widened since last time, the state of the bond break at each tile, and the condition of any coating.

A crown caught with a few new hairline cracks can be coated in an afternoon. The same crown left for several years can need recasting and new brick under it. The yearly record, with the crack map from the last visit, is what makes that comparison possible. We keep that map on file for the next visit.

Coat or recast, and the reasons

Crown type found: mortar wash, cast-in-place or precast
Top courses of brick relaid before the new crown goes on
Overhang, drip groove and slope for the new crown
Cure time before the cap goes back and the fireplace is used

Crown repair questions from Panama Park

Is Panama Park inside your crown repair area?

It is. On your Panama Park chimney we first identify the type of top and map its cracks, then put a coating or a recast in writing. Call (904) 920-5495 to book.

Can a crown be repaired in the rain?

No. Coatings and fresh concrete both need dry conditions for a set time after they go on. Crown work is scheduled for dry weather, and rain protection is on hand in case a shower arrives early.