Chimney mortar repair for homes in Oakleaf Plantation
Mortar matched to your brick in type and color, packed into your Oakleaf Plantation chimney joints under our satisfaction guarantee.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Family-owned mortar specialists serving Oakleaf Plantation
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Deep joints are filled in layers and tooled, not skimmed over.
- Free inspection and estimateEvery face of your Oakleaf Plantation chimney is scratch-tested and sketched at no charge.
- 100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
- Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.
One side worse than the others
Chimneys often wear unevenly. One face takes the prevailing rain, another stays shaded and damp, a third bakes in afternoon sun. Their joints wear at different rates, and an estimate that treats all four the same wastes money.
We survey each face on its own and price it that way. You can repoint the worst side now and schedule the rest, with the reason for each written down. One side of your Oakleaf Plantation chimney worse than the rest? Phone (904) 920-5495 and book a free joint inspection with our local crew.
The coastline lies beyond Oakleaf Plantation. Oakleaf Plantation falls within Clay County.
What chimney tuckpointing covers in Oakleaf Plantation
- Head joints cut by hand to protect brick edges
- Joints tooled to match and shed water
- Brick faces brushed clean as we go
- A repointing sketch of your Oakleaf Plantation chimney, free
How chimney tuckpointing runs
-
Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
-
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
-
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
-
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.
Earlier repairs on Oakleaf Plantation chimneys
A patchwork of old repairs is common on chimneys everywhere: caulk here, hard gray mortar there.
In Oakleaf Plantation we sort out which old patches are sound and which have to come out before repointing.
10% off any service booked within 72 hours of inspection
Sandy joints? Book the repointing within 72 hours of the survey and 10% comes off.
Cleaning and dampening raked joints
Raking leaves dust and loose grit in the joint, and fresh mortar laid on that grit has nothing firm to hold. So each joint is brushed or blown clean down to firm mortar and brick.
Next the joint is dampened, because dry brick pulls water out of fresh mortar and weakens it. Preservation Brief 2 describes masonry that is damp but without standing water. On a hot day that may mean dampening again just ahead of the trowel. It is a small step that decides whether the new joint bonds or cracks loose. A joint that is still dusty when the trowel arrives is cleaned again, however long it takes.
Why the top courses wear first
Above the roof line, a chimney stands exposed on all four sides. Rain hits it from all directions, sun heats it through the day, and water that gets past the top soaks the upper courses first.
It is common to find sound joints low on the stack and failed joints near the top. We survey both so the quote fits the damage. Where only the top courses need work, the rest is left alone, and the report says the lower joints were tested and found sound. Those upper courses also carry the chimney top, so their condition affects everything above the roof line.
Stair-step cracks mean movement, not wear
Zigzag cracking that steps through the joints usually means the masonry has moved: a footing settled, the chimney shifted or something pushed against it. Repointing that crack fills it, but it does not stop the movement.
When we see a stair-step crack, the cause gets checked before any tuckpointing is priced. A stable chimney with an old crack may need nothing more than repointing. If it is still moving, the structure is dealt with first, and the quote shows the two jobs on separate lines.
What goes on a repointing sketch in Oakleaf Plantation
- Loose top courses that need relaying rather than repointing
- Chimney top and roof metal defects priced as separate lines
- Interior or attic joints, with their own access and cleanup
- Joints that can wait a season, and how to watch them
Before the joints are raked
Which mortar will you use?
A type from ASTM C270 picked for your brick and its exposure, normally weaker than the brick itself, in line with preservation guidance. The type is written on the estimate.
What if you find loose bricks while raking?
We stop and show you. A loose brick or course needs relaying or replacement, which is priced as its own item before we continue.
More services in Oakleaf Plantation
-
-
-
-
-
-
Learn more about chimney tuckpointingAll services in Oakleaf Plantation
Get the joints on your Oakleaf Plantation chimney sound again
Raking and repointing the chimney at your Oakleaf Plantation home is work for our own family masons, after a free survey.
Free Inspection