Local chimney inspection in Oakleaf Plantation

A free inspection in Oakleaf Plantation that measures clearances, reads the flue end to end and flags any needed work.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Chimney inspection specialists who explain every finding

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

We explain each finding before we leave, and a sound chimney is called sound.

Free inspection and estimateThe chimney inspection at your Oakleaf Plantation home costs nothing, and a clean result is reported as clean.
Locally ownedA locally owned business shows you what it sees, so the findings are yours to check.
No hidden feesAny repair that comes out of the inspection gets its own line and price before you decide.

Call (904) 920-5495 Free Inspection

Smoke coming into the living room

Smoke that spills into the room has several possible causes, and an inspection sorts them out. The flue may be the wrong size for the opening, lined with deposit, or blocked. The chimney may be too short for the roof around it. The damper may not open fully. Or the house itself may be pulling air down the flue through exhaust fans and a tight envelope.

Each cause has its own test, from measuring the opening against the flue to running the fans with a fire lit. The finding names the likely cause for your Oakleaf Plantation fireplace, so the fix is chosen for the right reason. Starting the season in Oakleaf Plantation? Call (904) 920-5495 and book the inspection before the first fire.

At the 2020 Census, Oakleaf Plantation was home to 31,034 people. Oakleaf Plantation does not reach the coast.

Inspection work we handle in Oakleaf Plantation

Hearth extension measured against the opening
Deposit in the flue graded
Crown, cap and flashing checked from the roof
Flue size compared with the opening or appliance

Call (904) 920-5495 Free Inspection

From firebox to cap in Oakleaf Plantation

The reason noted first
We ask why you want the inspection, whether a sale, a new stove, a storm or a smell, and plan around it.
Firebox up to the flue
Firebrick, hearth, damper, smoke chamber and flue tile are checked with a strong light from below.
Roof and attic next
Crown, cap, flashing and brick are checked from the roof where safe, and clearances from the attic.
Findings explained on site
We go over each finding with you on site, and any repair gets its own price.

Chimney height against the roof in Oakleaf Plantation

A chimney has to rise 3 feet above where it leaves the roof and 2 feet above anything within 10 feet. A short chimney can smoke and puts sparks close to the roof.

The inspection in Oakleaf Plantation measures the height against the roof around it.

10% off any service booked within 72 hours of inspection

Your free inspection in Oakleaf Plantation is where the 72 hours for the discount begin.

Call (904) 920-5495 Free Inspection

Smoke chamber walls, parged or stepped

The smoke chamber funnels smoke from the wide throat into the narrow flue, and the code wants its walls built of solid masonry (FBC R1001.8). Some chambers are parged smooth; others step inward brick by brick. Either kind is checked for gaps, loose or missing brick, and mortar that has fallen away, since heat and gases escape through those openings into the chimney walls.

A stepped chamber also holds deposit on every ledge. When the surface has failed, the finding points to smoke chamber repair as a separate job and says whether the fireplace can be used in the meantime.

The thimble in the chimney wall

A thimble is the sleeve a connector passes through to enter the chimney from the side. The code wants it made of fireclay, rigid refractory or metal, and fitted so the connector cannot pull out of the inlet or reach past the inner face of the liner (FBC R1003.16).

The inspection checks that the thimble is intact, tight in the masonry and at the right height for the stove. Cracked or crumbling thimbles, or a connector poking into the flue where it catches deposit, are noted, along with how close the thimble sits to any wood framing. An open thimble with no connector in it is noted too, since it lets room air into the flue.

Flue area against an appliance connector

For a stove, furnace or other appliance, the flue it vents into may not be smaller in area than the connector feeding it (FBC R1003.14). The inspection reads the connector size and compares it with the flue or liner. Too small restricts the exhaust; much too large lets it slow and cool. For gas appliances, sizing comes from NFPA 54 and the appliance's installation manual instead.

When two appliances share one flue, each connection is checked, since the combination changes what the flue has to carry. The manual for each appliance is asked for at booking so the check has the right numbers.

Firebox, flue, roof and attic

Flue area compared with the fireplace opening or the appliance connector
Framing clearances checked in the attic and where floors and ceilings meet the stack
Factory-built listing label read and parts compared with the manual
Gas appliance vent path traced for blockage, separation and rust

Inspection questions from Oakleaf Plantation

Can you inspect the top if the roof is not walkable?

Yes. The top is examined from a ladder at the eave or from the ground with good optics. The findings say which parts were seen close up and which were not, so nothing is guessed at.

If the inspection is free, where does the 10% off come in?

The inspection itself costs nothing. If it turns up work and you book that work within 72 hours, 10% comes off the job. Ask for it on the call.