Chimney cap replacement in Oakleaf Plantation by local cap pros

Every cap we fit in Oakleaf Plantation lifts off for cleaning and goes back on tight. Ask our cap pros for a free inspection.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Chimney cap specialists who measure every flue

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

A cap in Oakleaf Plantation is sized from the tile it sits on, so it fits the first time and stays put.

Free inspection and estimateWe measure every flue on your Oakleaf Plantation chimney at no charge before any cap is ordered.
Upfront pricing, no hidden feesThe cap model, its metal and the fastening are priced together, so the total is clear.
Workmanship warrantyOur fitting and fastening carry the workmanship warranty, with the cap maker's terms in writing.

Call (904) 920-5495 Free Inspection

Choosing copper

Some owners pick copper for looks. A copper cap starts bright, darkens to brown and, over enough seasons, can turn green, and that patina is a protective layer rather than damage. Copper comes with one strict rule: it should not touch galvanized or bare steel where rain can bridge the two, or the steel corrodes.

So a copper cap going onto the Oakleaf Plantation crown is held down with copper or stainless screws, and every old galvanized clip and screw comes off the crown with the previous cap. The fastener metal is recorded next to the cap metal, so the pairing is on file for the next person. Lost the cap in the last blow? Call (904) 920-5495 and ask for the first dry day in Oakleaf Plantation.

Oakleaf Plantation is part of Clay County. Oakleaf Plantation had 31,034 residents at the 2020 Census.

Every cap job, tile to screw

Screen openings checked against Florida code R1003.9.2
Screen open area sized so the fire still draws
Hood height taken from the maker's chart
Old or rusted cap removed and hauled away

Call (904) 920-5495 Free Inspection

How chimney cap replacement runs

Tiles measured on the roof
Each flue tile is measured inside and out, along with its height above the crown.
Cap style and metal chosen
Slip-in, band-mount or full-crown, in a metal suited to the roof, with a screen that meets the Florida code.
Flue cleared, cap fastened
Any nest or debris comes out of the flue, then the cap is set and fastened for wind.
Fit and screen checked
We check that the cap sits square, the hood height matches the chart and the screen comes off for the sweep.

A damper that doubles as a cap in Oakleaf Plantation

A top-sealing damper sits on the flue tile with a hinged, gasketed lid, opened and closed by a cable from the firebox. Closed, it keeps rain, animals and room air where they belong.

When a chimney in Oakleaf Plantation also needs a better damper, we price this option beside a standard cap.

10% off any service booked within 72 hours of inspection

Even a small job like a cap gets the full discount.

Call (904) 920-5495 Free Inspection

Soot-clogged mesh and a lazy fire

Screen mesh sits in the path of every bit of soot and creosote that leaves a wood fire. Over a season the deposit narrows the openings, and a mesh that met the open-area rule when new may fall short. The symptoms show inside the house: a fire that is slow to catch, smoke that curls out at the top of the opening, and a smell of smoke in the room the next day. Brushing the mesh during a sweep clears it. When the mesh size is within the code, a screen that clogs again quickly usually points to how the fires are burned, with wet wood or too little air, rather than to a fault in the cap.

Metal chimneys take their maker's listed cap

A metal chimney that serves a factory-built fireplace was tested as a system, and its top cap was part of that test. The fireplace manual names the termination that belongs on it, by model.

A masonry-style cap clamped onto that pipe is outside the listing, and it can change how the chimney draws and how its layers stay cool. So when the cap on a metal chimney is damaged, the replacement comes from the chimney's maker for that model, ordered by the numbers on the fireplace plate. The framed box around such a chimney has its own sheet-metal top, which is a separate part with its own price.

Chimney swifts and the timing of a cap

Chimney swifts nest inside masonry flues, gluing small stick nests to the tile wall, and federal law protects the birds and their active nests. An active nest cannot be removed or sealed in, so a flue in use by swifts waits for its cap until the nestlings have fledged and the flock has moved on. Once they leave, the old nest is cleared and the cap closes the opening before the birds return the next year. If you hear steady chattering in the chimney during the warm months, tell us when you call so the visit is timed properly and nothing is disturbed that should not be.

Tile sizes we take in Oakleaf Plantation before ordering

Cap model and maker, chosen from the sizing chart for your tiles
Fastening method: set screws, clamp band or anchors into the crown
Old cap and its fasteners taken off the roof
Clean-up of old metal, screws and debris from the roof and yard

Before a new cap is ordered

Can the old cap be repaired instead of replaced?

A sound cap that has only worked loose can be reseated and refastened. Rusted mesh, a split band or a bent hood mean replacement. We tell you which one you have before any work is priced.

Will you need to get inside the house?

Not for the roof work itself, as long as we can reach the roof safely. If the flue needs clearing from below, or an animal is involved, someone needs to let us in to the fireplace.