Call(904) 920-5495

Family-owned vent-free fireplace service in Northside

We measure the room your ventless fireplace heats in Northside and compare it with the code before anything else, free.

  • Fully licensed and insured
  • Locally owned
  • Family owned and operated
  • Same-day service

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local vent-free fireplace pros in Northside

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off any service

Supply piping problems are named for the gas utility or a contractor.

  • Free inspection and estimateThe rating plate, the room and the flame of your unit in Northside are checked on a free visit.
  • Upfront pricing, no hidden feesCleaning, listed parts and labor are priced in writing before anything is ordered or fitted.
  • 100% satisfaction guaranteedIf the unit does not run the way we said after our service, we come back and put it right.

Vent-free logs in a factory-built fireplace

The code allows unvented log sets in a factory-built firebox only where that fireplace's own listing includes them. Putting a vent-free set into a metal firebox without that listing takes it outside both the code and the fireplace's tests. Look for the fireplace label inside the opening or behind a lower panel.

If your fireplace in Northside is factory-built, we read its label and the log set's manual before servicing, and tell you whether the combination is allowed. Where it is not, the options are written down.

Northside sits away from the coastline. Northside is a neighborhood within the City of Jacksonville.

From the sensor pilot to the room size

  • Oxygen depletion sensor pilots cleaned
  • Listed ODS pilot assemblies replaced
  • Burner ports and air inlets cleared
  • Ember material replaced as the manual shows

Plate, room, pilot, logs

  1. Rating plate and gas confirmed

    The model, gas, listing and input are read and the gas confirmed at the valve before parts are ordered.

  2. Room measured against the code

    The room volume and every unvented input in it are compared with the code and the manual.

  3. Pilot, burner and logs serviced

    The sensor pilot and burner are cleaned, the logs set to the diagram and worn parts replaced.

  4. Leak checked and run through a cycle

    Opened joints are leak checked, the flame is watched through a full cycle and findings are written down.

Carbon monoxide alarms in Northside homes

Florida's carbon monoxide alarm law applies across the state, inland Northside included, for homes built since July 1, 2008 with a fossil-fuel appliance or a fireplace. An alarm near the bedrooms is a sensible backup in any home with a vent-free unit.

Its presence is noted on the service ticket.

10% off any service booked within 72 hours of inspection

Vent-free work booked before 72 hours have passed since the inspection comes 10% off.

What vent-free means for the room

A vented gas fireplace sends its combustion products outdoors through a vent. A vent-free unit sends them into the room it heats, water vapor included. That single fact is why the code and the manuals put so many limits on where and how these units run.

Section 621 of the Florida fuel gas code permits unvented room heaters listed to ANSI Z21.11.2, installed inside those limits. Every service visit checks the unit against them, not only the parts that have failed. It also means the room itself is part of the appliance's design, which a vented unit never asks of it.

Sets listed for two ways of running

Some log sets carry two listings, as vent-free heaters under ANSI Z21.11.2 and as vented decorative appliances under ANSI Z21.60. Run vented, they need the damper open, and one manual says the thermostat function must not be used in that mode.

Label and manual together confirm which way your set is being run and that the setup matches it. A mismatch is corrected, or written up if it needs your decision. The label on the set shows both listings when it has them.

Children, pets and hot surfaces

The front and top of a running vent-free unit get hot enough to burn, and the manuals warn to supervise young children in the room with the heater. Pets, blankets and clothing belong away from the front.

We point out the hot areas and the manual's clearances for furnishings at the end of every service. A screen or barrier suited to the model can be priced if you want one. Glass or screens on some units get hot enough to burn skin on contact, and they stay hot after the flame is off.

Plate, room, pilot and logs, in writing

  1. Model, gas type, listing and input read from the rating plate
  2. Sensor pilot cleaned by the manual's method, flame shape checked
  3. Inlet and manifold pressure measured against the rating plate
  4. Soot sources traced before any wall cleaning is priced

Vent-free fireplace questions from Northside

Is same-day vent-free service possible in Northside?

When the day's schedule has room, yes. Reading us the model from the rating plate helps us bring the right pilot parts.

Is my room big enough for the unit?

The room is measured, every unvented appliance in it is added up, and we compare the total with the code's limit of 20 Btu per hour per cubic foot. The arithmetic is written on your ticket.

Ventless fireplace service at your Northside home

Book the free vent-free check in Northside; the service after it is 10% off when booked within 72 hours.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495