Local chimney repair for Nassauville homes
In Nassauville, a free inspection finds the failed part, and we fix it at the smallest scope that will hold.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney repair experts for Nassauville homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Repairs on your Nassauville chimney are ranked, safety first and wear last, so the money goes where it matters.
- Family owned and operatedThe family business that inspects your Nassauville chimney is the one that repairs it and answers for it.
- No hidden feesEach repair line carries its own price, and nothing gets added once the work is under way.
- Workmanship warrantyEvery finished repair line is covered by our workmanship warranty, and the estimate names those lines.
Timing chimney work around a new roof
When a roof is being replaced, the chimney is exposed in a way it will not be again for years. That is the moment to reflash it, check the crown and repoint the joints along the roof line. We can plan that sequence with your roofer: they strip the roof, we do the chimney work, and they roof back up to the new flashing.
Every item in the Nassauville re-roof plan is marked with the trade it belongs to, so nothing is left out or done twice. Without a re-roof, we still coordinate when a flashing repair needs tile or shingle lifted. Something loose, cracked or leaking up there? The Nassauville inspection is free at (904) 920-5495.
The coast is close to Nassauville. Mount Olive Missionary Baptist Church can be found in Nassauville.
What our chimney repair covers in Nassauville
- Loose top courses of brick taken down and relaid
- Open mortar joints raked out and repointed to full depth
- Framing clearance and fireblocking checked from the attic
- Each repair for your Nassauville home priced separately
Find it, rank it, fix it, show you
-
Roof, attic and firebox checked
We look at the chimney from all three places in one visit and note each defect where we find it.
-
Cause traced before the fix
Stains, cracks and loose brick are followed back to the part that let water or heat through.
-
Repairs from the top down
Cap and crown come first, then brick and joints, then flashing, using the mortar and metal named on your estimate.
-
Cleanup and a final walk-around
Debris leaves with us, and we show you each finished repair plus anything worth watching.
Storm checks for chimneys in Nassauville
Nassauville lies near the coast, where storm wind can affect exposed chimney parts. In hurricane season the top of a chimney takes the hardest pull.
After a storm we look at how the cap is fastened, whether the top courses moved and whether any flashing edge has lifted, and we write down what needs work.
10% off any service booked within 72 hours of inspection
Any repair counts, from one open joint to a new crown.
Chase covers on factory-built chimneys
On a factory-built fireplace, the flue is a listed metal chimney inside a framed chase, and the chase is topped with a sheet-metal cover. A cover that sits flat collects water, and a thin galvanized cover can rust through, letting water run down inside the chase onto the framing and the fireplace unit.
A sound replacement is made to measure, with a slope or cross-breaks so water runs off, a drip edge that clears the siding, and a collar and storm collar that fit the chimney pipe. The pipe itself stays the maker's listed part, so any work on it follows that maker's installation manual.
Water repellent goes on last
A clear water repellent can help sound brick shed rain, but its place in the order matters. Brushed on before the crown, flashing and joints are fixed, it treats the faces while water still pours in at the top and the roof line. Brushed onto wet brick, it can trap moisture inside.
The products we use on chimneys are vapor-permeable, silane or siloxane based, so water vapor can still leave the masonry. They go on after repairs, after the brick has dried, and at the coverage rate on the maker's data sheet. That makes the repellent an optional last step that follows the fixes it depends on.
Metal chimney parts close to salt water
Near the coast, salt carried on the wind settles on every metal part of a chimney and holds moisture against it. Galvanized caps, chase covers, fasteners and flashing lose their zinc coating faster under that film and start to rust sooner than the same parts further inland.
On chimneys in this band we look closely at cap mesh, cover seams and screw heads, and we specify stainless steel or copper parts with fasteners of a compatible metal, following each maker's guidance on exposure. The Brick Industry Association does not recommend galvanized steel for chimney flashing in any case, and near salt water the reasons add up faster.
Each defect, its cause and its price
- Every defect listed with its place on the stack and its cause
- Cap and screen sized to the flue, with the metal named
- Access plan covering ladders, roof protection and the rooms inside
- Cleanup and debris removal, inside and outside, noted for each line
Chimney repair questions from Nassauville
Will you work with my roofer?
Yes. Flashing and chimney work fit best into a re-roof schedule, and we can sequence our part with the roofer's. The estimate names which items belong to each trade.
Do Nassauville homeowners get the 10% discount?
Yes. Any repair booked within 72 hours of your free inspection comes 10% off, and it is shown as a separate line on the written estimate, where it is easy to check.
More services in Nassauville
-
-
-
-
-
-
Stop the leak or crack on your Nassauville chimney
Our chimney repair pros check the whole stack in Nassauville, write down what failed and price each fix. Call (904) 920-5495.
Free Inspection