Family-run chimney tuckpointing in Nassau Village-Ratliff

Recessed or crumbling mortar at your Nassau Village-Ratliff chimney repointed before it lets water into the brick, free inspection first.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local repointing pros for Nassau Village-Ratliff chimneys

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Water getting into the chimney from above is priced with the repointing, so new joints start dry.

Free inspection and estimateEvery face of your Nassau Village-Ratliff chimney is scratch-tested and sketched at no charge.
100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.

Call (904) 920-5495 Free Inspection

Repoint now or let it wait

Not every worn joint needs repointing today. A joint that has lost a little from its face but is sound behind can wait a season. A joint that is sandy through, or open enough to hold water, cannot. Harder joints and softer brick is a combination we look for on every older stack.

The estimate says which is which on each face, with what to watch until the next visit. That way you spend on the joints that are actually letting water in. Want to know what can wait on your Nassau Village-Ratliff chimney? Call (904) 920-5495, and our masonry pros will survey it for free.

Nassau Village-Ratliff lies within Nassau County. At the 2020 Census, Nassau Village-Ratliff was home to 5,561 people.

Repointing work we do in Nassau Village-Ratliff

Mortar type chosen to suit the brick
Color matched from a cured sample
Joints tooled to match and shed water
Brick faces brushed clean as we go

Call (904) 920-5495 Free Inspection

From the scratch test to cured joints in Nassau Village-Ratliff

Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.

The top courses on chimneys in Nassau Village-Ratliff

The courses above the roof take weather from every side, inland or not, and their joints usually wear before the rest.

On Nassau Village-Ratliff chimneys we check the top first and price it separately from the lower stack.

10% off any service booked within 72 hours of inspection

Our masons take 10% off repointing booked in the three days after they survey the joints.

Call (904) 920-5495 Free Inspection

Getting the mortar color right

Mortar color comes mostly from the sand, with the binder shifting the shade. Fresh mortar also looks darker wet than it will dry, so judging a match from the bucket goes wrong.

We make a small test batch, let it cure against the brick and compare it with the old joints in daylight. The mix is adjusted until it reads as part of the same wall. Where the old joints have weathered unevenly, we match the tone that covers the greater part of that face and show you the sample before the work begins. The approved sample stays on site as the reference for every batch mixed after it.

Why the top courses wear first

Above the roof line, a chimney stands exposed on all four sides. Rain hits it from all directions, sun heats it through the day, and water that gets past the top soaks the upper courses first.

It is common to find sound joints low on the stack and failed joints near the top. We survey both so the quote fits the damage. Where only the top courses need work, the rest is left alone, and the report says the lower joints were tested and found sound. Those upper courses also carry the chimney top, so their condition affects everything above the roof line.

Repointing some faces or the whole stack

Repointing only the failed faces saves money, and it is often the right call. The trade-off is appearance: new joints on one side can look slightly different from weathered joints on the next, even with a good color match.

We explain that trade-off before you decide. Where faces meet at a corner that shows from the street, it may be worth extending the work around it. Where the failed side faces the back of the house, the difference will not matter. The choice is yours, and the estimate prices each option. Either way, faces left untouched are recorded as tested and sound, so the next survey knows where to look.

Joint findings written down before pricing

Faces and courses needing repointing, marked on a sketch of the chimney
Color matched from a cured test batch shown to you first
Caulk or skim patches to remove before repointing
Chimney top and roof metal defects priced as separate lines

Repointing questions from Nassau Village-Ratliff

Do you repoint chimneys in Nassau Village-Ratliff?

Yes. Our masons repoint chimneys across Nassau County, Nassau Village-Ratliff included. Mention the sandy sides on the phone, and those faces are surveyed first, at no charge.

Is a fire safe while the chimney is being repointed?

Best not on the days we work on the top, and not until the new mortar has had its curing time. The estimate gives the wait based on the mortar and the weather.