Local chimney flue repair in Murray Hill
Repair or reline? For the flue in your Murray Hill home, we tell you plainly which one the tiles allow.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Family-owned flue experts serving Murray Hill
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The plan covers the whole flue, so separate fixes do not pile up over the years.
- Free inspection and estimateThe flue at your Murray Hill home is swept, examined from both ends and mapped at no charge.
- 100% satisfaction guaranteedIf the repaired flue is not sound and correctly sized when we finish, we make it right.
- Family owned and operatedA family business maps the flue and does the repair, so the plan and the work stay in one set of hands.
Curved clay pieces in the firebox
Pieces of thick, curved or flat clay on the smoke shelf or in the grate usually come from the flue lining. Clay tiles crack and shed chips from their inner face, and those chips fall straight down to the first ledge they meet.
The shape and color of the pieces help, but the flue itself shows where they came from. We sweep and examine it, find the damaged tile and tell you whether it can be replaced, resurfaced or needs a new liner. Tile pieces turning up in your Murray Hill fireplace? Phone (904) 920-5495 for a free flue inspection.
Murray Hill lies within Duval County. Murray Hill is inland.
Tile, joint, seal and size
- Loose mortar ridges knocked back inside the flue
- Gaps at the smoke chamber closed
- Inlet thimbles and cleanout doors checked on appliance flues
- Every defect written down by height
Sweep, map, repair, check
-
Swept and examined
The flue is cleaned, then looked over from the roof and the firebox with a light and mirrors.
-
Mapped and measured
Each defect is placed by height and wall, and the flue size is checked against what it serves.
-
Repaired by the chosen method
Top tiles swapped from the roof, damaged sections coated with a listed system, or a relining price when repair will not hold.
-
Checked and cured
The finished flue is examined from both ends and left to cure before the first fire.
What cracks flues in Murray Hill
Murray Hill is far enough inland that salt does little to a chimney here. Heat and water crack flues: hot fires in cold flues, and rain soaking joints through an uncapped top.
Both show on a flue map, and both have repairs that fit the damage.
10% off any service booked within 72 hours of inspection
A mapped, repaired flue comes 10% off when booked inside 72 hours of our visit.
Flues that bend and the 30 degree limit
Leaning is allowed in a flue lining, within a limit. The code allows a slope no greater than 30 degrees from vertical. Beyond that, gases slow, deposits settle and the bend becomes hard to clean.
At an offset, tiles are cut on an angle and the joints are awkward to fill, so cracks and gaps cluster there. Repairs at a bend have limits too. Tools for resurfacing must pass the angle, and a replacement tile must be cut to match it. We note each offset's position and angle on the flue map, since it decides which repair can reach the damage.
Using the fireplace before the flue is fixed
A cracked or open-jointed flue lets heat and flue gas reach the masonry around it, and in an interior chimney that masonry sits two inches from framing (R1003.18). That is the reason we ask that a damaged flue not be used until it is repaired.
The repair itself is usually planned around your schedule, with any materials ordered in advance. Until then, the damper stays shut and the fireplace unused. If the flue serves an appliance you rely on, we tell you what that means for the appliance and who should look at it in the meantime.
Checking the flue once the repair is done
Finished work is checked from both ends of the flue. Replaced tiles are examined for alignment and smooth joints. A resurfaced flue is examined for full coverage, with no crack or joint left showing, and the coat is left to cure for the time its system specifies before any fire.
The flue size is measured again after resurfacing, to confirm it still meets what the fireplace or appliance needs. The results go on the invoice with the method and materials used, so the next yearly inspection has a record of what was done and where.
Flue findings written down before pricing
- Every defect located by flue, height and wall on a written flue map
- Sweeping needed before the flue can be judged, listed on its own
- Inlet thimble and cleanout door condition on appliance flues
- Water entry at the cap and bond break priced alongside
Flue repair questions from Murray Hill
Is flue repair cheaper than relining?
When the damage suits a repair, it is usually the smaller job. When it does not, stacking repairs on a failing flue costs more in the end, and we price relining instead so you can compare.
What does a flue inspection in Murray Hill cost?
The inspection is free, and the flue map with every defect and its price comes with it. Book the repair within 72 hours and you save 10% on it.
More services in Murray Hill
-
-
-
-
-
-
Learn more about chimney flue repairAll services in Murray Hill
Repair cracked flue tiles in Murray Hill
Sweep found a crack in Murray Hill? Read us the note at (904) 920-5495, and we plan the visit around it.
Free Inspection