Gas fireplace venting for Mayport homes
The code's clearances and the maker's vent rules, applied to your Mayport gas fireplace on a free visit.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Gas fireplace venting experts for Mayport homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Roof covering work is named for a roofer, and gas piping for the gas trade.
- Free inspection and estimateThe vent on your Mayport gas fireplace is traced from the collar to the cap and measured against the code at no charge.
- Upfront pricing, no hidden feesEach section, fitting and reroute is priced on its own line before any pipe is cut or replaced.
- 100% satisfaction guaranteedIf the flame, the draft or the shutdown problem is not fixed by the vent repair we quoted, we come back.
Direct vent or B-vent
Gas fireplaces vent in one of two ways, and knowing which one you have decides every repair. Sealed direct-vent units breathe through a pipe-within-a-pipe to the outside, while natural-vent units pull air from the room and push exhaust up a double-wall pipe on its own heat. The rating plate and the pipe itself usually settle the question in minutes.
The two systems use different parts and follow different rules, and a repair keeps the one the appliance was built for. Not sure which kind is on your Mayport fireplace? We identify it free; call (904) 920-5495.
Within Jacksonville city limits, Mayport is its own named neighborhood. Mayport is part of Duval County.
Vent work on Mayport gas fireplaces
- Firestops checked at every reachable penetration
- Spillage tested with the house's fans running
- New vent routes drawn before any cutting
- Roof covering work named for a roofer
How our venting pros trace a gas vent in Mayport
-
Identify the system
The manual and pipe markings tell us the vent type, size and maker.
-
Trace the run
With the unit off and cool, we follow the vent and check joints, supports and clearances.
-
Repair with listed parts
Joints are reseated, damaged sections replaced and crowded caps moved.
-
Test and record
We fire the unit, check flame and draft, then note every fix.
10% off any service booked within 72 hours of inspection
A vent check and repair booked within 72 hours of the trace comes 10% off.
One appliance, one vent
Gas appliances generally get their own vent. One maker's direct-vent manual spells it out: the fireplace vents outdoors, stays off any chimney used by a separate solid-fuel appliance, and shares no vent with another gas appliance.
Where we find a gas fireplace vent tied into another vent, or sharing a flue with a wood stove, it is written up as a fault, and the fix is a separate vent laid out to the manual. The appliance stays off until that is done if exhaust is spilling. The same rule applies to a new appliance added later.
Vent restrictors and when they are set
Restrictors balance exhaust and intake air on certain direct-vent layouts. One maker's manual calls for an open-center restrictor on its top-vent installations that use a 90-degree elbow and a vertical rise, made by breaking out the center of the supplied part.
A restrictor in the wrong position or missing where the manual calls for one changes the flame. After any change to a direct-vent run, we check the restrictor against the manual for the new layout and note its setting on the ticket. A restrictor removed during an earlier repair is a common thing to find.
Height limits on a B-vent
Natural-draft vents need height to draw. One maker's B-vent fireplaces need at least 8 feet of vertical vent, measured from the top of the unit to the top of the termination, and allow no more than 40 feet.
The same manual limits any horizontal portion to half the height of the vent system, measured center to center. A short or mostly sideways B-vent drafts poorly and can spill at the draft hood. We measure the system against those figures before repairing it, since a repair that keeps a failing layout keeps the problem. A tall vent can overdraw too, which is why there is a maximum as well as a minimum.
Traced in Mayport before any vent pipe is replaced
- Air space to framing checked where the pipe passes joists and walls
- Obstructions within 24 inches of the cap noted and cleared
- B-vent height, horizontal length and roof cap height measured
- Supports, firestops and fastening along the run
Before the vent is opened up
Is B-vent the same as direct vent?
No. B-vent carries exhaust up by natural draft from a unit that burns room air; direct vent is sealed and draws its air from outside. Each fireplace uses the one it was built for.
How often should the vent be inspected?
Once a year at minimum, plus a check before first use, by someone qualified. We can put it on the calendar.
More services in Mayport
-
-
-
-
-
-
Learn more about gas fireplace ventingAll services in Mayport
A vent that draws and seals in Mayport
Ring (904) 920-5495 for a free vent inspection in Mayport, and 10% comes off a repair booked in the three days after.
Free Inspection