Call(904) 920-5495

Chimney flue tile replacement in Lakeside

Heat and smoke kept inside the flue again, and our 100% satisfaction guarantee on every Lakeside flue repair.

  • Fully licensed and insured
  • Locally owned
  • Family owned and operated
  • Same-day service

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Flue specialists who map before they repair

  • Locally owned in Jacksonville
  • Family owned and operated
  • 100% satisfaction guaranteed
  • Free inspection and estimate
  • Same-day service available
  • 10% off any service

Local and family owned, we come back to the same Lakeside chimney if a repair slips.

  • Free inspection and estimateThe flue at your Lakeside home is swept, examined from both ends and mapped at no charge.
  • 100% satisfaction guaranteedIf the repaired flue is not sound and correctly sized when we finish, we make it right.
  • Family owned and operatedA family business maps the flue and does the repair, so the plan and the work stay in one set of hands.

Cracks that run across the tiles

A crack that circles a tile, rather than running up it, often points to movement: a chimney that has settled, a footing that shifted or a stack pushed by something leaning against it. Horizontal cracks in several tiles at the same height are worth a look at the chimney outside too.

We record where the cracks sit and check the masonry around them before choosing a repair. Mending tiles in a chimney that is still moving would only be a temporary fix. Horizontal cracks in the flue at your Lakeside house? Call (904) 920-5495 and our flue pros will inspect it at no charge.

The county for Lakeside is Clay County. The 2020 Census counted 31,275 residents in Lakeside.

Flue repairs we handle in Lakeside

  • Flue swept, then examined from both ends
  • Flue size measured before any coat goes in
  • Inlet thimbles and cleanout doors checked on appliance flues
  • A written flue plan for your Lakeside chimney, free of charge

From the first look to a sealed flue in Lakeside

  1. Swept and examined

    The flue is cleaned, then looked over from the roof and the firebox with a light and mirrors.

  2. Mapped and measured

    Each defect is placed by height and wall, and the flue size is checked against what it serves.

  3. Repaired by the chosen method

    Top tiles swapped from the roof, damaged sections coated with a listed system, or a relining price when repair will not hold.

  4. Checked and cured

    The finished flue is examined from both ends and left to cure before the first fire.

Tile pieces on the smoke shelf in Lakeside

Clay chips on the smoke shelf mean a tile is failing above it. Inland, the cause is usually heat or water rather than anything in the air.

We trace the pieces to their tile in Lakeside and repair that section.

10% off any service booked within 72 hours of inspection

From one cracked tile to a full relining, flue work in Lakeside is discounted.

How far a flue lining has to run

The lining is meant to run the full height it serves. An appliance flue's lining begins 8 inches or more under its lowest inlet. A fireplace flue's lining begins where the smoke chamber ends. Either way, it finishes above the surrounding chimney walls (R1003.12).

Gaps at either end are common repair points. At the bottom, the first tile may not meet the smoke chamber cleanly. At the top, the last tile may have been cut short or broken back to the crown. We check both ends on every flue, since a sound middle with open ends still lets heat and gas into the masonry.

When the honest answer is a new liner

Some flues cannot be repaired into a sound, correctly sized passage. Tiles that have shifted out of line, sections that have broken out, damage that runs the full height or a flue already too small for its fireplace all point the same way.

In those cases, a new liner sized to the fireplace or appliance is the fix. That is a separate job, and we price it as such rather than stacking repairs on a flue that will not hold them. You see the reasons written against the flue map, so the recommendation can be checked against what we found.

Repairing a flue that serves a gas appliance

Flue linings for gas appliances fall under the code's fuel gas chapter, and gas appliance makers set their own venting rules. A clay flue that once served a fireplace is not automatically suited to a furnace or water heater.

When a flue serves a gas appliance, we read the appliance's rating plate and instructions before choosing a repair. Some appliances need a liner of a particular type and size, and a clay flue repaired to suit a fireplace can still be wrong for them. The appliance itself, including its connection and gas supply, stays with the gas contractor, and the estimate names who does what.

Flue findings written down before pricing

  1. Every defect located by flue, height and wall on a written flue map
  2. Resurfacing system named with its UL 1777 listing, where one is used
  3. Offsets and bends noted with their height and angle
  4. Sections that could not be seen, and the access they need

Flue repair questions from Lakeside

Can my water heater flue be repaired the same way?

Sometimes, but gas appliance flues follow the code's fuel gas chapter and the appliance's own venting rules. We read the appliance plate first and choose a repair or liner that suits it.

What does a flue inspection in Lakeside cost?

The inspection is free, and the flue map with every defect and its price comes with it. Book the repair within 72 hours and you save 10% on it.

Have the flue checked while the fireplace is cold

Our flue pros sweep, map and price every defect in your Lakeside flue. Call (904) 920-5495.

Free Inspection

Call the chimney and fireplace experts

(904) 920-5495

Free inspection and written estimate

Call (904) 920-5495