Family-run fireplace insert installation in Lake Asbury
Family-owned insert pros in Lake Asbury check that the fireplace, the chimney and the hearth can take a wood insert, at no charge.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Wood insert experts for Lake Asbury homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Our family business walks you through insert options for your Lake Asbury fireplace before pricing anything.
- Free inspection and estimateYour Lake Asbury firebox, chimney height and hearth are measured against the insert's manual at no charge, before anything is ordered.
- Upfront pricing, no hidden feesEvery part of the job is priced before ordering, from repairs to the rain cap, and nothing is added without your yes.
- 100% satisfaction guaranteedIf the insert smokes or draws poorly after installation to its manual, we come back and set it right.
A mantel close to the opening
Wood inserts run hotter at the face than an open fireplace, and each insert's label sets how far a combustible mantel, trim and side walls must stay from it. The figures change from one model to the next, sometimes by several inches.
We measure your mantel, trim and walls against the label of the insert you choose, before it is ordered. A mantel that sits too close means a different model or a change to the trim, and we set out both so the decision is yours. Mantel near the opening in Lake Asbury? Ask us at (904) 920-5495.
Lake Asbury lies within Clay County. At the 2020 Census, Lake Asbury was home to 11,036 people.
What fireplace insert installation covers in Lake Asbury
- Firebox measured against the insert's size table
- Dampers locked open or removed for the liner
- Hearth extensions and ember protection where required
- A first-fire walk-through at your Lake Asbury home
Measure, repair, reline, fire
-
Measure against the manual
Firebox, chimney height, hearth and clearances are checked against the insert's table before ordering.
-
Repair and clean first
Fireplace repairs are made and cured, and the flue is cleaned before the liner goes up.
-
Liner, plate and cap
A listed stainless liner runs to the top, closed with a top plate and a rain cap.
-
Set, seal and fire
The insert and surround go in as the manual directs, and the first fire is run with you.
What matters for an insert inland
Inland in Lake Asbury, salt is not what decides how an insert installation holds up. The fit of the insert, the liner size and the draft of the chimney decide how well it works.
We measure all three on the free visit.
10% off any service booked within 72 hours of inspection
Liner and install together, a wood insert in Lake Asbury comes 10% off.
The federal smoke limit on a new wood insert
Federal rules for wood heaters, 40 CFR Part 60, Subpart AAA, cover inserts. The Step 2 limit covers units made on or after May 15, 2020, and any sold at retail from that date: no more than 2.5 grams of particulate an hour in a cord wood test, or 2.0 grams in a crib wood test.
A permanent label on the insert states that it meets the limit, and we read it before an insert goes in. A unit that meets Step 2 burns cleaner than older designs, but it still needs dry wood and the right air setting to do so, which is part of the walk-through on install day.
Locking open or removing the damper
Once the liner passes the damper, the plate has to stay out of its way. Manuals call for the existing damper to be locked open or taken out, and one maker also allows masonry or steel, including the damper plate, to come off the smoke shelf and the damper frame when needed to fit a liner.
That allowance comes with a limit: the removal must not weaken the fireplace or chimney or reduce the protection of nearby combustibles below what the code requires. We decide what can come out after looking at the throat, and the estimate says what will be cut or removed before the work.
Clearances measured from the insert body
Labels on inserts list how far combustible materials must stay from them. One model's figures, measured from the insert body, are 20 1/2 inches to an adjacent side wall, 24 inches to a mantel or top facing, and 6 1/2 inches to side facing that projects an inch and a half.
Other models have other numbers, so the label of your insert decides. We measure your mantel, trim, side walls and any shelves near the opening against those figures before ordering, and write down any trim that would have to change or any model it would rule out.
Fireplace, flue and hearth on paper first
- Top plate trimmed, seated and sealed, with a rain cap on the liner
- Mantel, side facing and side wall clearances measured to the label
- Metal tag fixed to the fireplace back wall when the manual supplies one
- Separate lines for repairs, liner, insert, surround and cap
Wood insert questions from Lake Asbury
Can any fireplace in Lake Asbury take a wood insert?
No. The fireplace must be at least the size the insert's manual lists, sound or repaired first, with a chimney tall enough and a flue of its own. We check all of it on a free inspection.
Does a new wood insert have to meet an EPA limit?
New wood heaters made or sold at retail since May 15, 2020 must meet the EPA Step 2 limit, and the permanent label says so. We read it before installing.
More services in Lake Asbury
-
-
-
-
-
-
Learn more about wood-burning fireplace insert installationAll services in Lake Asbury
A wood insert that fits your Lake Asbury fireplace
Have the insert model handy when you ring (904) 920-5495, and our fireplace experts will check it against your Lake Asbury firebox.
Free Inspection