Chimney rebuild in Lake Asbury by local masonry pros
Rebuilding in Lake Asbury means taking down only what has failed, and a free inspection shows where that line falls.
- Family owned and operated
- Free inspection and estimate
- Same-day service available
- Upfront pricing, no hidden fees
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
or call (904) 920-5495
Why Choose Us
Chimney rebuild specialists who test every course
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off when you book today
Anything we cannot know until the masonry is open is listed as an allowance, with the reason.
- Family owned and operatedOur family business takes your Lake Asbury chimney down by hand and lays it back up itself.
- Upfront pricing, no hidden feesThe take-down line, flue plan and crown are priced before the first brick comes off.
- Workmanship warrantyFrom the new courses to the counterflashing, the rebuilt stack carries our workmanship warranty.
Permits for a chimney rebuild
Whether a rebuild needs a permit, and what inspections come with it, is for the local building department to decide, since the work is structural masonry. We do not guess on your behalf: the estimate states our expectation on the permit and who applies.
Where inspections apply, they fall at set points, such as before the crown pour or at the end, and the schedule allows for them. If no permit is needed, the estimate says that too. Keep the permit record with the Lake Asbury house papers, since a future buyer may ask for it. Tell us what you see from the ground; (904) 920-5495 reaches our rebuild team in Lake Asbury.
Lake Asbury falls within Clay County. Lake Asbury had 11,036 residents at the 2020 Census.
What's Included
Rebuild work around Lake Asbury
- Flue covered before the first brick comes off
- Brick lowered by bucket or chute, never thrown
- Sound original brick cleaned and saved to relay
- Finished height checked against the code's height rule
How It Works
How a rebuild in Lake Asbury runs
-
Take-down line marked
We test each row of brick from the top down and mark where sound brick starts.
-
Old brick taken down by hand
The flue is covered and the roof protected, then brick comes off a row at a time, with sound brick saved to relay.
-
Relaid plumb around the flue
Brick goes back in matched mortar with tooled joints, around new clay tile or ready for a listed liner, and is flashed into the roof.
-
Crown cast, cap on last
A new crown with an overhang and a drip edge cures before the cap goes on and the first fire is lit.
Local Conditions
Two flues in one rebuilt stack in Lake Asbury
Where two flues run in one chimney, the code wants a masonry divider at least 4 inches thick between them, so smoke and heat stay in their own flue.
A rebuild in Lake Asbury that opens both flues puts that divider back in full.
10% off your first service when you book today
Booking chimney rebuild in Lake Asbury today? Your first service with us is 10% off.
Saving the original brick
Sound brick from the take-down is the best match the chimney will ever get, so it is sorted on the roof. Pieces with intact faces and edges are set aside; cracked, soft or face-damaged brick is discarded.
Saved brick is cleaned of old mortar by chipping or with a masonry hammer, without breaking the edges, and stacked by which face was out. Relaying weathered faces outward keeps the rebuilt section close to the color of the rest of the chimney. Brick with old paint or heavy soot staining is kept for inner courses where it will not show.
How thick the chimney walls must be
A rebuilt chimney has to meet the code's wall thickness. Masonry chimney walls are built of solid masonry units, or hollow units with their cores grouted solid, not less than 4 inches in nominal thickness (FBC R1003.10).
That works out to one full brick thickness around the flue, with the tile or liner space inside it. A rebuild does not thin the walls to fit a larger liner, and where an old stack was built thinner than that, the rebuilt section is brought up to the requirement. Corners are interlocked course by course so the walls act together.
Measuring the finished height
Before the crown is cast, the rebuilt stack's height is checked against FBC R1003.9: a minimum of 3 feet above its highest roof penetration, and a minimum of 2 feet above anything on the house inside a 10-foot circle.
The 10-foot measurement is taken around the chimney in every direction, including toward dormers, a steeper roof section or an addition. A tape and a level from the roof deck give the numbers; nothing is judged by eye.
If the old top was short, the extra courses go on before the crown is cast, so the new height is built in rather than added later. The measurement and the reference point used are recorded.
Free Inspection
Tested before a rebuild is priced in Lake Asbury
- Mortar type chosen from ASTM C270 to suit the brick and exposure
- New clay tile in refractory mortar, or space left for a listed liner
- Cricket need for a wide chimney, and who builds it
- Cure time allowed before the cap goes on and the first fire
FAQ
Before the first brick comes off
Do you rebuild chimneys in Lake Asbury?
We do. Describe what you are seeing on the chimney and the roof type, and the Lake Asbury estimate visit is planned around testing the masonry.
Will the rebuilt section look like the rest of the chimney?
Original brick is reused where it tests sound, and new brick is chosen for size, then color and texture. New mortar shades differently at first and settles as it cures. An exact match is not something anyone can promise; the estimate shows which brick is planned.
Our Services
More services in Lake Asbury
-
-
-
-
-
-
Test your Lake Asbury chimney course by course
Family-owned masonry professionals mark the take-down line on your Lake Asbury chimney at no charge.
Free Inspection