Family-owned top damper installation in Julington Creek Plantation
Chimney top damper installation in Julington Creek Plantation, with the throat damper made safe and the cable run clean.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local pros who fit chimney top dampers in Julington Creek Plantation
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The frame goes on sound tile, and a cracked rim is repaired first.
- Free inspection and estimateYour flue tile in Julington Creek Plantation is measured and the crown checked on a free visit before any damper is ordered.
- Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
- 100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.
Turning an open flue into a closed one
Between fires, an open flue behaves like an open window at the top of the house. Warm, humid outdoor air and cooled indoor air move through it, and the direction depends on the day. Closing that window between fires is the whole purpose of the damper.
Sealing the top turns that open flue into a closed one whenever the fireplace is not in use. We fit it to the tile on your chimney in Julington Creek Plantation, set the cable and hand you a short written note on using it.
Julington Creek Plantation lies within St. Johns County. Julington Creek Plantation sits away from the coastline.
From the tile measurement to the handle
- Flue tiles measured for the right damper size
- Top sealing dampers set in the maker's adhesive
- Handle brackets anchored where you can reach them
- Make and model of your Julington Creek Plantation damper written down
From the tile measurement to the first fire in Julington Creek Plantation
-
Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
-
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
-
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
-
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.
Rain down an inland flue in Julington Creek Plantation
An inland chimney in Julington Creek Plantation still takes rain at its top. Without a cap or a closed damper, that rain reaches the smoke shelf and rusts the throat damper.
Closing the damper between fires keeps the flue dry.
10% off any service booked within 72 hours of inspection
A top damper install in Julington Creek Plantation comes 10% off, cable run to the firebox included.
The parts of a top sealing damper
Four parts make up a top sealing damper: a metal frame that sits on the flue tile, a lid hinged to it with a gasket where the two meet, a spring that pushes the lid open, and a stainless cable that links the lid to a firebox handle. Pull and lock the handle, and the lid closes on its gasket.
Release the handle, and the spring opens the lid for a fire. Because the seal is at the very top, rain and outside air are kept out of the whole flue between fires. Each part is replaceable with the maker's own pieces when it wears. Knowing which part does what makes a problem easy to describe on the phone, and easy to price.
A sound tile to bond to
The adhesive that holds the frame bonds to the top of the flue tile. A tile with cracks near the top, a chipped rim or a loose section will not hold the frame, and the damper can shift or lift in wind.
We clean the tile rim and check it closely before fitting. Damaged tile at the top is repaired or replaced first, and that work is priced as its own line so you can see why it is needed. A tile that is sound but stained is cleaned back to firm material where the bead will run.
Top dampers and chimney plugs compared
An inflatable plug or a draft stopper closes the flue from below and has to be taken out before a fire. A top damper closes the flue from above and opens with its handle. Either can be left closed by mistake, and neither should be.
A top damper's handle sits in the firebox, where it is hard to miss before lighting, and it seals the whole flue from the weather. We explain both options, and fit the damper where it suits how you use the fireplace. Some owners keep a plug as well as a top damper; the plug still has to come out before a fire.
Tile, crown, throat and model, in writing
- Flue tile outside dimensions measured and the model chosen to fit
- Handle bracket anchored in the firebox where you approve
- Every flue identified, with the damper on a fireplace flue only
- Gasket, spring and cable condition noted on the ticket
Top damper questions from Julington Creek Plantation
Do I still need a chimney cap?
On a single fireplace flue, the open lid sheds rain like a cap, so one may not be needed. Other flues, or a wish for a spark screen, can still call for one, and we explain it on the estimate.
What if I forget to open it?
The handle hangs in the firebox where it is easy to see, and we show you how to check the lid before lighting. Smoke at the opening is the sign it is closed, so put the fire out and open the damper.
More services in Julington Creek Plantation
-
-
-
-
-
-
Learn more about top-sealing damper installationAll services in Julington Creek Plantation
Top sealing dampers fitted in Julington Creek Plantation
Describe what the throat damper does when you call (904) 920-5495, and we set up the free visit in Julington Creek Plantation.
Free Inspection