Chimney waterproofing in Jacksonville Beach by local experts
One test patch before the whole Jacksonville Beach stack is treated, checked once it has cured. The first inspection is free.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Chimney waterproofing specialists who test before spraying
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Glass, skylights and roofing near your Jacksonville Beach chimney are covered before a drop is sprayed.
- Free inspection and estimateWe splash test your Jacksonville Beach chimney at no charge and tell you if the brick needs treatment at all.
- No hidden feesRepairs and repellent are separate lines, and nothing is added once the spraying starts.
- 100% satisfaction guaranteedIf treated brick still soaks up water where we sprayed, we come back and put it right.
Finding the water path before any spray
Waterproofing your chimney in Jacksonville Beach is the last step of a job. Before anything is sprayed, we find out how water is getting into the masonry: through open joints, cracked brick, the crown, the flashing, or through the brick faces themselves. The first four are repairs. Only the last is what a water repellent is made for. So a visit starts with a close look and a splash test, and the estimate lists the repairs, the cure time they need, and then the treatment, with the product named so you can read its data sheet before you agree. Damp patches on the chimney in Jacksonville Beach? Call (904) 920-5495 and we will test the brick.
Census takers counted 23,830 people in Jacksonville Beach in 2020. Jacksonville Beach borders the coast.
Test, repair, then treat
- Cure time after repointing taken from the data sheet
- Brick cleaned so the repellent reaches the pores
- Coverage kept to the maker's rate, never heavier
- Painted or glazed brick left out, as the maker directs
Splash, repair, patch test, flood
-
Splash test every face
Water on each face shows where the brick soaks it up, and the crown, cap and flashing are checked for openings.
-
Openings closed and cured
Joints, brick, crown and flashing are repaired first, and the cure time on the data sheet runs its course.
-
Clean, patch test, then flood
The brick is cleaned, a test patch dries beside untreated brick, then the repellent goes on from the bottom up.
-
Dry and retest
Once it has cured, we splash the faces again so you can see the water bead off.
Salt, rain and brick near the ocean in Jacksonville Beach
Jacksonville Beach reaches the coastline, and storm rain there can carry salt into the pores of the brick. Salts left behind as the wall dries show up as white deposits and can wear the face.
A breathable repellent cuts how much water the faces take in, but only after the white deposits have stopped coming, which tells us the water path is closed.
10% off any service booked within 72 hours of inspection
Book the repairs and the treatment together and the discount covers both.
The crack width a repellent will not bridge
A penetrating treatment lines the pores of the masonry; it does not fill a gap. BIA's clear-coatings note draws the line precisely, saying these products seldom keep water out of cracks more than 0.02 inch wide. That is about half a millimeter, roughly the thickness of five sheets of printer paper stacked together.
Wider openings, such as an open head joint, a cracked brick or a separation under the crown, pass water straight by the treated surface around them. Those are fixed with mortar or new units first. The treatment, if it still makes sense, comes once the wall is closed.
New masonry and the four-week wait
A freshly built or rebuilt section of chimney is full of water from its own mortar. The maker of the siloxane we apply asks for a minimum 28-day cure on new masonry before treatment. BIA suggests waiting longer still on new brickwork, at least a month after the building is closed in and preferably a year, so the salts carried out as that construction water dries, known as new building bloom, are not sealed under a coating. When the top of a chimney has been rebuilt, the repellent is scheduled after that cure, with the earliest date it can go on agreed in advance.
Holding off while salts are still coming out
White efflorescence is a sign that water is still travelling through the masonry and depositing salt where it dries. BIA's position is that brickwork with a history of it should be coated only after the moisture source has been corrected, because salts that cannot reach the surface may crystallize just behind it and break the face. So the steps run in order: the deposit is brushed off dry, the water path is found and repaired, and the wall is watched for fresh deposits before any treatment is booked. If the white returns, the repair is not finished, and treatment waits.
Repairs and treatment, priced apart
- Product name and type: silane, siloxane or a blend of the two
- Existing sealer or paint identified before any product is chosen
- Efflorescence brushed off dry, with its water source dealt with first
- Stucco or stone areas, and the product listing that covers them
Waterproofing questions from Jacksonville Beach
Is chimney sealing the same as waterproofing?
People use both words for the same job. What matters is the product: we use penetrating repellents that let the brick breathe. Film sealers and paint stay off.
Can the treatment be done the same day as repointing?
No. Fresh joints need at least 72 hours to cure first, according to BIA and the product's data sheet, so treatment is a second visit.
More services in Jacksonville Beach
-
-
-
-
-
-
Learn more about chimney waterproofingAll services in Jacksonville Beach
Keep rain out of your Jacksonville Beach chimney
A simple splash test shows whether your brick in Jacksonville Beach soaks up rain. Call (904) 920-5495 to have our masonry experts run it.
Free Inspection