Fireplace repair in Garden City by local experts
Two lists for your Garden City fireplace from a free inspection, what needs fixing now and what can wait.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local fireplace experts for Garden City homes
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Hearth and trim distances are measured against the code while we are there.
- Locally ownedA locally owned business shows you the failing part of your Garden City fireplace before any price.
- Upfront pricing, no hidden feesSafety repairs come first on the estimate, and items that can wait are priced on their own lines.
- 100% satisfaction guaranteedIf the fireplace still smokes or sticks after the repair we quoted for it, we come back.
A test fire, read like an instrument
A small test fire tells us more about a smoking fireplace than any amount of looking up the flue. We light it with the damper fully open and watch where the smoke goes in the first minutes, when the flue is coldest, then again once it has warmed.
We repeat with a window cracked and with the exhaust fans off. Smoke that stops when the window opens points to the house. Smoke that clears once the flue warms points to a cold start. Smoke that keeps rolling out points to the fireplace itself, and in Garden City that sequence decides the repair before any part is priced. A fireplace specialist can look at your Garden City fireplace for free; phone (904) 920-5495 to set it up.
Garden City lies within Duval County. Garden City does not reach the coast.
Fireplace repairs for Garden City homes
- Masonry or factory-built settled before any part is named
- Hearth slab support checked when tile cracks across
- Rusted lintel over the opening checked for movement
- Spark screen fitted to your Garden City fireplace opening
Identify, test, repair, test fire
-
Type and rating plate read
We settle whether the fireplace is masonry or factory-built and read the model where there is one.
-
Joints, damper and hearth checked
Joints are probed, the damper worked through its travel, and the hearth and trim measured.
-
Repair with the right materials
Refractory mortar and firebrick for masonry, the maker's parts for factory-built units.
-
Test fire and cleanup
Where smoke was the problem, a short test fire checks the fix, and the room is cleaned before we go.
Factory-built fireplaces in Garden City
A factory-built fireplace lines its firebox with refractory panels instead of firebrick. Fine cracks are normal; a panel broken through to the steel is not.
For factory-built units in Garden City, we read the rating plate and order panels by model.
10% off any service booked within 72 hours of inspection
Smoke, damper or firebox, whatever is wrong with your Garden City fireplace, the repair is 10% off.
Pokers, rotary handles and chains
Dampers are worked by one of a few mechanisms: a poker handle that pushes the plate open and hooks at a notch, a rotary handle on the face of the fireplace turning a rod, or a chain running to a damper at the top of the flue. Each fails in its own way. Pokers bend and their notches wear, rotary rods seize where they pass through the masonry, and chains stretch or pull free of their bracket. The repair may be freeing, straightening or replacing the linkage rather than the damper itself, and it is priced apart from the plate so you are not buying a new damper to fix a handle.
Measuring a hearth extension against the code
The hearth extension is measured out from the fireplace opening. For a masonry fireplace with an opening under 6 square feet, it runs at least 16 inches in front and 8 inches past each side.
At 6 square feet or more, those figures become 20 and 12 inches. The opening is measured as width times height at the face, so a tall opening can cross the line even when it looks modest. Where an extension falls short, the fix is extending it with noncombustible material to size, and flooring that runs under the old edge may need to be cut back.
Working out how far trim can stand out
Trim near a masonry opening follows a simple ratio in the code: nothing combustible within 6 inches, and within 12 inches, no more than 1/8 inch of projection for each inch away from the opening. A piece of wood 8 inches from the opening may stand out 1 inch.
At 6 inches it may stand out three-quarters of an inch. Past 12 inches the ratio no longer applies. We measure each piece of trim and molding on the face, including the underside of a mantel shelf, and anything over the limit is listed with the fix, whether trimming it, moving it or replacing it with noncombustible material.
Parts, materials and safety items on paper
- Refractory panels ordered by model number from the rating plate
- Mantel and trim distances taken from the edge of the opening
- Outside air inlet screen and damper checked on factory-built units
- Spark screen checked for gaps and replaced with the listed part
Fireplace repair questions from Garden City
Do you repair factory-built fireplaces as well as brick ones?
Yes. Factory-built units are repaired with the maker's parts, ordered from the model on the rating plate, so the fireplace stays within its listing. Brick fireplaces are repaired with firebrick and refractory mortar to the building code.
Is there a charge for the estimate?
No. The written estimate is free, and the price on it is upfront, with no hidden fees added later.
More services in Garden City
-
-
-
-
-
-
Learn more about fireplace repair and serviceAll services in Garden City
Fix the firebox, damper or hearth in Garden City
Tell us whether it is the damper, the firebox or the hearth when you call (904) 920-5495, and our fireplace experts bring the right materials to Garden City.
Free Inspection