Chimney liner installation in Fruit Cove by local liner pros

We size the liner to what burns in your Fruit Cove fireplace or stove at a free inspection, then follow its listing to the cap.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Relining pros who prove the flue in Fruit Cove first

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

A liner in Fruit Cove is sized to what burns in the fireplace or stove, never to whatever is in stock.

Free inspection and estimateWe sweep and measure the flue in Fruit Cove at no charge before any liner is ordered.
Upfront pricing, no hidden feesLiner size, alloy, insulation and cap are one written price, set before the order goes in.
Workmanship warrantyHow we install the liner is covered by our workmanship warranty, and the maker's terms come in writing.

Call (904) 920-5495 Free Inspection

Relining an outside-wall chimney

A chimney on an outside wall is exposed on three faces, and the gases inside cool quickly. That makes condensation and creosote more likely, and it is where liner makers point to insulation as worth its space even when the listing does not demand it.

An insulated liner keeps the flue warmer from bottom to top, helps the draft start faster, and cuts the moisture that settles on the walls. On each Fruit Cove house, we say whether insulation is required by the listing or recommended for the exposure, two different reasons that are worth keeping apart. Where space inside the old tile is tight, insulation is weighed against the liner size the appliance needs. Call (904) 920-5495 and a liner specialist will measure your Fruit Cove flue for free.

The coastline lies beyond Fruit Cove. Fruit Cove falls within St. Johns County.

Chimney liner work we take on in Fruit Cove

Insulating blanket or poured mix where the listing asks
Insert joined with the maker's stove adapter
Crown under the top plate checked on your Fruit Cove chimney
Installation record for your Fruit Cove home left with you

Call (904) 920-5495 Free Inspection

How chimney relining runs

Sweep and prove the flue
The flue is swept clean, then a test piece or cone is lowered to make sure the liner will pass every bend.
Size and alloy chosen
The diameter comes from the appliance collar or the fireplace opening, and the alloy from the fuel.
Liner run down and joined
The liner goes down with its insulation where the listing asks, and joins the stove, insert or smoke chamber below.
Top plate, cap and record
The top plate is clamped and sealed, the cap fastened, and you get the installation record.

Gas appliances and flue size in Fruit Cove

Gas exhaust carries water vapor, and in an oversized masonry flue it can cool and condense, washing out mortar joints.

When a gas appliance vents into a chimney in Fruit Cove, the liner is sized from the venting tables in NFPA 54 and the appliance manual.

10% off any service booked within 72 hours of inspection

In Fruit Cove, a liner is discounted whether it serves wood, gas or an insert.

Call (904) 920-5495 Free Inspection

Poured insulation around a liner

Instead of a blanket, some liner systems are insulated with a loose, lightweight mix poured into the space between the liner and the old flue walls. It fills irregular spaces that a blanket cannot, including gaps around offsets and oversized tile.

The mix needs the bottom of the space sealed first so it stays where it is poured, and it adds a break-in period to the first fires, set by the maker. It suits a flue with room to spare around the liner. Which method is planned, and why it fits your flue, is explained before the job. The mix goes in from the top in stages so it settles evenly.

Letting the liner grow with heat

Stainless steel expands as it heats. A liner many feet long grows measurably during a hot fire and shrinks as it cools, and the installation has to allow for that movement. Flexible liner's corrugations take up much of it along the length.

At the top, the insulation wrap ends a short way under the crown, leaving the liner free to move within the top plate's clamp without tearing the wrap. At the bottom, the connection is supported but not locked so rigidly that expansion has nowhere to go. Those details come from the maker's instructions and are followed as written.

The crown under a new top plate

A top plate sits on the crown and seals to it, so the crown's condition matters to the liner. A crown with open cracks lets water into the masonry around the new flue, and water trapped between old tile and liner can stain the chimney and rust fasteners.

When the crown is sound except for small cracks, a crown sealer before the plate goes on may be enough. When it is broken up or missing its overhang, repair or recasting comes first. Either way the crown work is its own line on the estimate, so the liner price stays the liner price.

Measured before a liner is ordered in Fruit Cove

Insert adapter fitted and clamped to the insert's flue collar
Crown repair under the top plate, priced as a separate item
Sweep of the old flue and smoke chamber before installation starts
Permit need and who files it, stated in writing up front

Before a liner is ordered

Can relining be done in one day?

A plain liner in a straight, clean flue can go in within a day. Tile removal, insulation, crown repair or a new wall opening add time, and the estimate gives the schedule.

Does a wood stove need a stainless liner?

The code requires the flue lining to suit the appliance, and a stove set into an existing masonry chimney needs a flue sized to its collar. Our answer is a listed stainless liner from the stove collar to the top, sized from the stove's manual.