Family-run chimney tuckpointing in Bryceville
Recessed or crumbling mortar at your Bryceville chimney repointed before it lets water into the brick, free inspection first.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local repointing pros for Bryceville chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The color is matched from a cured test batch before a single joint is filled.
- Free inspection and estimateEvery face of your Bryceville chimney is scratch-tested and sketched at no charge.
- 100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
- Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.
Repoint now or let it wait
Not every worn joint needs repointing today. A joint that has lost a little from its face but is sound behind can wait a season. A joint that is sandy through, or open enough to hold water, cannot. Harder joints and softer brick is a combination we look for on every older stack.
The estimate says which is which on each face, with what to watch until the next visit. That way you spend on the joints that are actually letting water in. Want to know what can wait on your Bryceville chimney? Call (904) 920-5495, and our masonry pros will survey it for free.
Bryceville lies within Nassau County. Bryceville sits away from the coastline.
Raked, filled, tooled and cured
- Worn joints raked to sound depth
- Deep joints filled in layers, not one pass
- Old caulk and skim patches cut out
- Roof and yard protected, debris cleaned up
From the scratch test to cured joints in Bryceville
-
Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
-
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
-
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
-
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.
Storm season and joints in Bryceville
Hurricane season, June 1 to November 30, brings heavy rain inland too, and weak joints can wash out in a single storm.
If you see mortar crumbs below your Bryceville chimney after a storm, have the joints checked.
10% off any service booked within 72 hours of inspection
For a home in Bryceville with several faces to repoint, every face booked in the 72 hours is discounted.
How deep worn mortar is raked out
National Park Service Preservation Brief 2 ties raking depth to joint width. Take a joint 3/8 inch wide: its old mortar comes out at least 3/4 inch deep, roughly double its width or a little beyond, and deeper again where it is still loose. For typical brick joints, that lands around half an inch to an inch.
Too shallow, and the new mortar sits as a thin skin that falls out. Too deep without cause, and bricks lose support. We rake to sound mortar, square the back of the joint so the new fill has a flat surface to bond against, and check depth as we go rather than trusting one measurement.
Where a grinder helps and where it harms
On long bed joints between courses, a grinder can open the joint quickly, provided the joint is wide enough for the blade and the mason is steady. The danger is the brick edges, which a wandering blade chips or widens.
We use a grinder only where the joint width allows it, keep the cut inside the old mortar and finish by hand to square the joint. On older, softer brick, or where joints are thin, the whole job is done by hand. The method for each face is written on the estimate so there is no surprise about what tools come up the ladder.
Why new mortar is softer than the brick
Preservation Brief 2 wants new pointing mortar weaker than the brick and more open to vapor. Mortar is meant to be the part that gives, taking up movement and letting moisture leave the wall through the joints.
Mortar stronger than its brick sends those stresses and that moisture through the brick instead, and the brick edges and faces start to break down. So the strongest mortar is not the best choice for every chimney. We check the brick first and choose a mortar that suits it, then write the type down.
Joint findings written down before pricing
- Color matched from a cured test batch shown to you first
- Chimney top and roof metal defects priced as separate lines
- Joint profile to match, tooled once the mortar has firmed
- Interior or attic joints, with their own access and cleanup
Repointing questions from Bryceville
How close will the new mortar color be?
A sample batch is mixed, cured beside your brick and checked in daylight before any joint is filled. New joints can still look slightly fresher at first, and we show you the sample so you know what to expect.
Is a fire safe while the chimney is being repointed?
Best not on the days we work on the top, and not until the new mortar has had its curing time. The estimate gives the wait based on the mortar and the weather.
More services in Bryceville
-
-
-
-
-
-
Learn more about chimney tuckpointingAll services in Bryceville
Book a joint survey before the next storm
Mortar crumbling in Bryceville? Tell us which sides at (904) 920-5495, and we start the survey there.
Free Inspection