Chimney flue tile replacement in Brooklyn
Family-owned flue specialists map your Brooklyn flue from top to bottom for free, then save the liner where it can be saved.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local flue pros for Brooklyn chimneys
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
The plan covers the whole flue, so separate fixes do not pile up over the years.
- Free inspection and estimateThe flue at your Brooklyn home is swept, examined from both ends and mapped at no charge.
- 100% satisfaction guaranteedIf the repaired flue is not sound and correctly sized when we finish, we make it right.
- Family owned and operatedA family business maps the flue and does the repair, so the plan and the work stay in one set of hands.
A flue map, written by height
Our flue estimate reads like a map. Each defect is listed by flue, by height from the top or the firebox and by wall, with what it is: a crack, an open joint, a flaked face or a displaced tile.
Next to each entry is the repair and its price, and at the bottom is the flue size check against what the flue serves. That layout lets you see why a single repair path was chosen for the whole flue. Want a flue map for your chimney in Brooklyn? Call (904) 920-5495; the inspection that produces it is free.
The county for Brooklyn is Duval County. Brooklyn sits away from the coastline.
What a flue repair covers in Brooklyn
- Flue swept, then examined from both ends
- Cracked top tiles cut out and replaced from the roof
- Every defect written down by height
- Flue mapped at your Brooklyn home before any price is given
Sweep, map, repair, check
-
Swept and examined
The flue is cleaned, then looked over from the roof and the firebox with a light and mirrors.
-
Mapped and measured
Each defect is placed by height and wall, and the flue size is checked against what it serves.
-
Repaired by the chosen method
Top tiles swapped from the roof, damaged sections coated with a listed system, or a relining price when repair will not hold.
-
Checked and cured
The finished flue is examined from both ends and left to cure before the first fire.
Flue size and draft in Brooklyn
Draft problems after a repair usually come from a flue made too small. The code's size rules apply the same in every town.
In Brooklyn we measure before resurfacing, so the repaired flue still draws for the fireplace it serves.
10% off any service booked within 72 hours of inspection
Flue repair earns the 10% off even if you have booked with us before.
The mortar that holds flue tiles
The mortar between flue tiles is its own material. Section R1003.12 names a medium-duty refractory mortar that water will not dissolve, made to ASTM C199, and it wants every joint tight and finished smooth on the flue side. Ordinary masonry mortar or a generic patch is not that material.
When a joint is remade or a tile is reset, the same class of mortar goes back in. Smooth joints matter as much as tight ones, because a ledge of mortar inside the flue catches deposits and slows the gases. The estimate names the mortar used for any tile work, so the repair matches what the code asks for.
Masonry between neighboring flues
When a chimney carries two or more flues, R1003.13 puts a masonry wythe of 4 inches or more between neighboring linings, tied into the chimney walls. The divider keeps one flue's heat and gases out of the next, and it gives each flue its own draft.
Old chimneys sometimes have the divider cracked or missing. It matters more when the flues serve different appliances, since leakage between them can pull fumes into a flue that should be clean. We check each divider we can see and note where it is broken, because it changes whether repairing the tiles alone is enough.
Checking the flue once the repair is done
Finished work is checked from both ends of the flue. Replaced tiles are examined for alignment and smooth joints. A resurfaced flue is examined for full coverage, with no crack or joint left showing, and the coat is left to cure for the time its system specifies before any fire.
The flue size is measured again after resurfacing, to confirm it still meets what the fireplace or appliance needs. The results go on the invoice with the method and materials used, so the next yearly inspection has a record of what was done and where.
Flue findings written down before pricing
- Sweeping needed before the flue can be judged, listed on its own
- Flue area measured against the fireplace opening or appliance connector
- Relining priced when repair cannot give a sound, sized flue
- Water entry at the cap and bond break priced alongside
Flue repair questions from Brooklyn
Can my water heater flue be repaired the same way?
Sometimes, but gas appliance flues follow the code's fuel gas chapter and the appliance's own venting rules. We read the appliance plate first and choose a repair or liner that suits it.
When can I light a fire again once the flue is fixed?
After the mortar or resurfacing coat has cured for the time its maker specifies. The estimate gives that time, and we confirm the flue is clear before you light the first fire.
More services in Brooklyn
-
-
-
-
-
-
Learn more about chimney flue repairAll services in Brooklyn
Repair cracked flue tiles in Brooklyn
Our flue pros sweep, map and price every defect in your Brooklyn flue. Call (904) 920-5495.
Free Inspection