Local chimney waterproofing in Bellair-Meadowbrook Terrace

Open joints and a cracked crown come before any spray, and a free inspection of your Bellair-Meadowbrook Terrace chimney shows that order.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local waterproofing experts for Bellair-Meadowbrook Terrace brick

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Fresh mortar cures fully before any repellent covers it, as the data sheet asks.

Free inspection and estimateWe splash test your Bellair-Meadowbrook Terrace chimney at no charge and tell you if the brick needs treatment at all.
No hidden feesRepairs and repellent are separate lines, and nothing is added once the spraying starts.
100% satisfaction guaranteedIf treated brick still soaks up water where we sprayed, we come back and put it right.

Call (904) 920-5495 Free Inspection

Rechecking an earlier treatment

Every clear repellent wears in time, and BIA does not treat any of them as permanent. If your Bellair-Meadowbrook Terrace chimney was treated years ago, a quick test shows where it stands: wet each face and watch. Protected brick throws the water off and keeps its color, while brick whose protection has worn turns dark as it soaks the water in.

We run that test from the roof, mark which faces still repel water and which do not, and treat only the faces that need it. Coating a face that is still protected adds cost and can reduce how well the wall breathes. Damp patches on the chimney in Bellair-Meadowbrook Terrace? Call (904) 920-5495 and we will test the brick.

Bellair-Meadowbrook Terrace does not reach the coast. Bellair-Meadowbrook Terrace lies within Clay County.

Waterproofing work we do in Bellair-Meadowbrook Terrace

Open joints and cracked brick repaired before treatment
Brick cleaned so the repellent reaches the pores
Breathable silane or siloxane repellent, product named
Painted or glazed brick left out, as the maker directs

Call (904) 920-5495 Free Inspection

From splash test to cured repellent in Bellair-Meadowbrook Terrace

Splash test every face
Water on each face shows where the brick soaks it up, and the crown, cap and flashing are checked for openings.
Openings closed and cured
Joints, brick, crown and flashing are repaired first, and the cure time on the data sheet runs its course.
Clean, patch test, then flood
The brick is cleaned, a test patch dries beside untreated brick, then the repellent goes on from the bottom up.
Dry and retest
Once it has cured, we splash the faces again so you can see the water bead off.

Stucco chimneys in Bellair-Meadowbrook Terrace

The repellent we use lists portland cement stucco among its surfaces. Cracks in the stucco let water behind it, so they are repaired first.

A test patch on a stucco chimney in Bellair-Meadowbrook Terrace shows how the surface takes the product before the rest is treated.

10% off any service booked within 72 hours of inspection

Treating your Bellair-Meadowbrook Terrace chimney? Three days is enough to decide and still save 10%.

Call (904) 920-5495 Free Inspection

Visibly dry brick and a rain-free window

For a penetrating product to soak in, the pores need to have room for it. The maker's directions call for clean, structurally sound masonry that is visibly dry, and they rule out wet or saturated surfaces. They also ask for a six-hour window with no rain expected, unless the treated wall can be sheeted with plastic. After a run of wet days, brick can look dry at the face while still holding water further in, so on the day we check the brick itself, pressing and looking at freshly scraped mortar, rather than relying on the forecast and the look of the surface alone.

Protecting windows, skylights and shingles

Silane and siloxane products react with unprotected glass as well as brick, as BIA's note points out, and the note adds that these chemicals can etch glass. The maker of the product we apply adds paint, plants and asphalt-based materials such as roof shingles to the list of things to keep clear. So before any spraying, the glass in windows, skylights and doors close to the stack is covered, the roof surface around it is shielded, and plants below are protected as the directions describe. Any overspray that reaches an uncovered surface is washed off with soap and water straight away.

More is not better

A heavier coat of repellent can seem like better value. BIA's note says the coverage rate is critical, because putting on too much can cut the breathability of the masonry, and breathability is the whole reason for choosing a penetrant over a film. The maker of the product we use gives a coverage range per gallon that depends on how porous the surface is, and very dense brick takes less than soft brick. We work within that range, keep track of how much each face has taken, and record it in the job notes so the next treatment can be planned from real figures.

Repairs and treatment, priced apart

Cure time after repointing, taken from the product's data sheet
Surface cleaning method, and any old coating that must come off
Test patch location, and when it will be checked after curing
Clean-up of overspray on nearby surfaces the same day

Waterproofing questions from Bellair-Meadowbrook Terrace

Is chimney sealing the same as waterproofing?

People use both words for the same job. What matters is the product: we use penetrating repellents that let the brick breathe. Film sealers and paint stay off.

Can you treat a stucco chimney?

The product we use lists portland cement stucco among its surfaces. Cracks in the stucco are repaired first, and a test patch shows how it takes the product.