A top sealing damper fitted to your chimney in Bayard
A family-owned crew in Bayard seals your chimney at the top and walks you through the handle before we leave.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Local pros who fit chimney top dampers in Bayard
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
You get a walk-through on opening, closing and locking the lid.
- Free inspection and estimateYour flue tile in Bayard is measured and the crown checked on a free visit before any damper is ordered.
- Upfront pricing, no hidden feesThe model, the handle position and any tile or crown work are priced in writing up front.
- 100% satisfaction guaranteedIf the lid does not seal or open the way we showed you, we return and adjust it.
Cooled air escaping up the chimney
An open or leaky flue is a vertical duct from the living room to the sky. When the house is air-conditioned, cooled air can rise out through it between fires, and the fireplace wall can feel warm or damp in hot weather. The effect is easy to miss because it happens quietly, every day the fireplace is not in use.
Closing the flue at the top with a gasketed lid stops that air movement for the whole chimney. We fit top dampers on fireplaces in Bayard with the handle where you can reach it and show you how to use it. The inspection is free.
The coastline lies beyond Bayard. Bayard is one of the named neighborhoods of Jacksonville.
What our crew fits and fixes at the flue top in Bayard
- Flue tiles measured for the right damper size
- Old throat dampers removed or fixed open
- Cables run clean from lid to firebox
- Owners shown how to open, close and lock the lid
The order of a top damper install
-
Tile measured on the roof
The flue tile's outside size, height and rim are checked on a free visit, with the crown around it.
-
Model ordered to fit
The damper is chosen from the maker's size chart for your tile and approved on the estimate first.
-
Frame set, cable run
The frame is set in the maker's adhesive, the old plate made safe and the cable run to the handle.
-
Adjusted and demonstrated
The lid is adjusted to seal, and you try the handle before we leave, with the cure time written down.
Standard models inland in Bayard
Away from the coast, the standard top damper models fit standard fireplace flue tiles in Bayard, and salt resistance is not the deciding factor. Fit and size are.
We choose the model from the tile measurement and the maker's size chart.
10% off any service booked within 72 hours of inspection
The damper, the cable and the fitting are all discounted.
Measuring the flue tile
Top dampers are sized to the outside dimensions of the flue tile, since the frame sits over or on its top edge. Clay tiles come in several square and rectangular sizes, and round flues need a model made for round openings.
On the roof, the tile's outside dimensions are measured and its top edge checked for level and soundness. The model is chosen from that measurement and the maker's size chart, and both go on the estimate. A multi-flue chimney is measured flue by flue, since tiles on the same chimney can differ in size.
Running the cable down the flue
From the lid, the stainless cable hangs down the middle of the flue, passes the throat and ends at the firebox. It must not rub on a sharp tile joint or the edge of an old damper frame, since a cable that chafes will fray.
We route it clear of obstructions, pass it through the throat where the old plate was, and leave enough length for adjustment at the handle. A cable that has to bend around an offset in the flue gets guides where the maker allows them. Where the cable passes the throat, a smooth path is left so it does not snag when the lid opens and closes.
Top dampers and decorative gas appliances
Vented decorative gas appliances made for wood fireplaces are tested to ANSI Z21.60, and their installation instructions require the fireplace damper to be removed or permanently fixed open. The appliance vents through the flue and depends on it staying open.
Any damper that can be closed does not fit that rule unless it is locked permanently open, which defeats its purpose. Where such an appliance is in the firebox, we explain the conflict and the alternatives before anything is ordered. The appliance's own manual has the final word, and we read it before recommending anything.
What we check before fitting a top damper in Bayard
- Tile height above the crown checked against the maker's minimum
- Frame set in the maker's adhesive, with the cure time written down
- Walk-through on opening, closing and locking the lid
- Make, model and flue size written down for your records
Before the damper is ordered
What happens to my old damper?
It is removed or fixed fully open so it cannot close across the flue. The ticket records which.
Can a top damper go on any chimney?
It needs a masonry fireplace flue with a sound tile standing high enough above the crown. Flues for other appliances and listed metal chimneys are handled differently, and we tell you which applies.
More services in Bayard
-
-
-
-
-
-
Learn more about top-sealing damper installationAll services in Bayard
Seal the flue where it ends
A lid at the top, a handle in the firebox, and your chimney in Bayard closed between fires. Call (904) 920-5495.
Free Inspection