Chimney mortar repair for homes in Avondale
Mortar repair for Avondale chimneys by a local crew that protects your roof and cleans up every crumb.
- Fully licensed and insured
- Locally owned
- Family owned and operated
- Same-day service
Get Your Free Inspection
Get a quote for chimney and fireplace repair and installation in Jacksonville.
Request received
Thank you. We will call you shortly to set a time.
Quicker by phone? Call (904) 920-5495
Masons who survey every face first
- Locally owned in Jacksonville
- Family owned and operated
- 100% satisfaction guaranteed
- Free inspection and estimate
- Same-day service available
- 10% off any service
Fresh mortar is shaded and covered, so weather does not undo the work.
- Free inspection and estimateEvery face of your Avondale chimney is scratch-tested and sketched at no charge.
- 100% satisfaction guaranteedIf the new joints are not sound, full and matched as agreed, we come back and fix them.
- Family owned and operatedA family masonry crew does the survey and the work, so the person who priced a face is the one who repoints it.
Cracked joints and a cracked top
Worn joints and a cracked chimney top often turn up together, because both let water into the same masonry. Repointing below a top that still leaks means the new joints get soaked from above. Order matters on a chimney, and we explain which repair should come first.
The top is checked before the joints are priced, and any repair up there gets a separate line beside the repointing. Doing them in the same visit saves setting up twice on the roof. Joints and chimney top both failing in Avondale? Phone (904) 920-5495 and book a free inspection with our masons.
The coastline lies beyond Avondale. Avondale is one of the named neighborhoods of Jacksonville.
Raked, filled, tooled and cured
- Head joints cut by hand to protect brick edges
- Color matched from a cured sample
- Old caulk and skim patches cut out
- Brick faces brushed clean as we go
How chimney tuckpointing runs
-
Every face surveyed
Joints are scratch-tested at several heights and the failed courses marked on a sketch.
-
Joints raked and cleaned
Old mortar comes out to sound depth, head joints by hand, then joints are cleaned and dampened.
-
Filled in layers and tooled
Matched mortar goes in stage by stage, then is tooled to the original profile.
-
Cured and cleaned up
Fresh joints are protected while they cure, the faces brushed and the roof cleared.
Settling and stair-step cracks in Avondale
Stair-step cracks through the joints come from movement, and the cause is in the chimney's footing, not the town.
In Avondale we check whether the chimney is still moving before repointing a crack like that.
10% off any service booked within 72 hours of inspection
For a home in Avondale with several faces to repoint, every face booked in the 72 hours is discounted.
Tooling the joint to shed water
Once the final layer has firmed, the joint is tooled: pressed and shaped with a jointer to compact the surface and match the profile of the old joints. Tooling closes tiny gaps at the brick edge where water could enter.
For exterior walls, the Brick Industry Association's water penetration note prefers concave and V profiles made with a jointer, since tooling compacts the mortar and the shape sheds rain. Where the original joints are a different profile, we match them so the wall reads as one. The profile used is written on the estimate. A joint tooled too early smears, and one tooled too late crumbles at the edge, so timing is watched face by face.
Water repellent after repointing
Some chimneys benefit from a water repellent once the new mortar has cured. It has to be vapor permeable, so moisture inside the wall can still get out, and it is applied on the product maker's schedule, not the same day as the mortar.
A repellent does not fix open joints. It goes on after they are repointed, if at all. It is suggested only where the brick and its exposure point to a benefit, with the product written into the quote. Many chimneys need nothing more than sound joints and a dry top. If a product is recommended, you see its data sheet and the reason for it before agreeing.
Repointing some faces or the whole stack
Repointing only the failed faces saves money, and it is often the right call. The trade-off is appearance: new joints on one side can look slightly different from weathered joints on the next, even with a good color match.
We explain that trade-off before you decide. Where faces meet at a corner that shows from the street, it may be worth extending the work around it. Where the failed side faces the back of the house, the difference will not matter. The choice is yours, and the estimate prices each option. Either way, faces left untouched are recorded as tested and sound, so the next survey knows where to look.
What goes on a repointing sketch in Avondale
- Faces and courses needing repointing, marked on a sketch of the chimney
- Mortar type under ASTM C270 and the reason for it
- Spalled or cracked bricks to replace before their joints
- Chimney top and roof metal defects priced as separate lines
Before the joints are raked
Could the cracks simply be caulked?
Caulk or a thin skim over worn mortar has nothing solid to grip and falls away, often hiding deeper failure while it lasts. Raking and refilling the joint is the repair that holds.
What does the repointing survey in Avondale cost?
The survey and estimate are free. Book the repointing within 72 hours of the survey and 10% comes off.
More services in Avondale
-
-
-
-
-
-
Learn more about chimney tuckpointingAll services in Avondale
Get the joints on your Avondale chimney sound again
Joints our masons repoint in Avondale are covered by our satisfaction guarantee as well as our workmanship warranty.
Free Inspection