Firebox repair in Atlantic Beach

From a few raked joints to a relined back wall, Atlantic Beach firebox repair sized to the damage, with a free inspection first.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Firebox specialists who test every brick in Atlantic Beach

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

A relining is measured against the firebox depth first, so the fireplace stays within the code.

Free inspection and estimateEvery wall of the firebox in Atlantic Beach is tapped and probed cold, and the failed bricks and joints are marked at no charge.
Upfront pricing, no hidden feesEach wall is quoted for what it needs, a few joints, a few bricks or a full reline, so a small repair stays small.
100% satisfaction guaranteedIf a joint we repointed opens again after it has cured and been used as the ticket says, we come back and redo it.

Call (904) 920-5495 Free Inspection

Mortar crumbs on the grate

Sandy grit on the grate or the firebox floor after a fire comes from somewhere above it. In a masonry firebox that is the joints between the firebricks, the softest part of the lining, giving up a little at a time. We start a firebox repair visit in Atlantic Beach by finding which joints are open, how deep the soft mortar goes and whether the bricks beside them still sit tight.

Open joints alone are a repointing job, and the estimate says so instead of reaching for a rebuild. Seeing grit on the grate in Atlantic Beach? Call (904) 920-5495 and we will look before the next fire.

Atlantic Beach falls within Duval County. Atlantic Beach had 13,513 residents at the 2020 Census.

What firebox repair covers in Atlantic Beach

Cracked firebrick replaced to size, one brick at a time
Bowed walls checked against the masonry behind them
Gaps along the base of the walls repointed
Painted fireboxes cleaned back where mortar must bond

Call (904) 920-5495 Free Inspection

How firebox repair runs

Keep the firebox cold
Let the fireplace go unused for several hours ahead of our visit, so each wall is cool to the touch.
Tap, probe and mark
Each brick is sounded, each joint probed, and the failed ones marked and written up by wall.
Rake, rebrick or reline
Joints are raked and repointed, failed bricks replaced and worn walls relined in C199 mortar.
Cure date on the ticket
The mortar maker's drying time sets the date of the first small fire, written down before we leave.

Coastal homes and the first fire in Atlantic Beach

When a fireplace on the coast in Atlantic Beach has gone a long stretch unused, the joints and the salt-exposed metal parts are worth checking together before the first fire.

Fresh refractory mortar needs its full drying time before that fire, so book the check with time to spare.

10% off any service booked within 72 hours of inspection

Open firebox joints? The repair you book before three days are out is 10% off.

Call (904) 920-5495 Free Inspection

Paint, sealers and new mortar

Fresh refractory mortar has to bond to clean masonry. One medium-duty maker states that its product cannot go onto a painted surface and that all paint must be removed for proper adhesion.

Painted or coated firebrick is therefore cleaned back to bare material wherever new mortar will touch it: the joint faces, the edges of a replaced brick and the opening a brick is set into. Paint on the rest of the lining can stay if you want it to, and the estimate states how much surface the cleanup covers. A coating on firebrick does not protect the lining from heat, so it is not a reason to skip a repair.

Factory-built fireplaces are another repair

Molded refractory panels in a metal body mark a factory-built fireplace, a unit tested and listed with its own chimney pipe. Those panels are replaced with the replacement panels listed for that model, not with laid firebrick and mortar.

The quickest way to tell the two apart is the rating plate, which a factory-built unit carries and a masonry firebox does not. When the fireplace proves to be factory-built, the work is written up as prefab fireplace repair, a separate service with its own parts list, and the masonry firebox rules on this page do not apply to it.

New firebrick, not salvaged brick

Old brick from a demolition can look like a bargain for a firebox repair. The Brick Industry Association advises against salvaged brick in fireplace construction because it may lack the strength and durability needed.

In a firebox there is a second question: what the old brick actually is. Salvaged units are often face or common brick rather than firebrick meeting ASTM C27 or C1261, and they carry old mortar that new mortar bonds to poorly. We use new firebrick and match the size and color as closely as supply allows, with any visible difference noted on the estimate before the order.

Checked in Atlantic Beach before any brick comes out

Paint cleaned off wherever new mortar has to bond
Floor firebricks lifted, rebedded and reset flat
Back wall slope and throat height kept on any rebuild
Product name and standard of every mortar and brick used

Before the first fire after a repair

How long before we can use the fireplace after a firebox repair?

That depends on the mortar. One medium-duty refractory mortar needs at least 7 to 10 days before heat, and we write the exact date on the ticket. The first fire after that should be small.

Is the inspection really free?

Yes. The firebox check and the written estimate cost nothing, and the pricing is upfront with no hidden fees. Book the repair within 72 hours of the check and 10% comes off.