Cracked hearths repaired in American Beach by local pros

We sound every tile on your American Beach hearth, measure the extension and write the fix down before any work. Free inspection.

Fully licensed and insured
Locally owned
Family owned and operated
Same-day service

Call (904) 920-5495 Free Inspection

Get Your Free Inspection

Get a quote for chimney and fireplace repair and installation in Jacksonville.

Quicker by phone? Call (904) 920-5495

Call our chimney crew

(904) 920-5495 Free Inspection

Local hearth repair pros for American Beach homes

Locally owned in Jacksonville
Family owned and operated
100% satisfaction guaranteed
Free inspection and estimate
Same-day service available
10% off any service

Stone and tile go down on full beds, which is why they stay solid under a tap.

Free inspection and estimateYour hearth in American Beach is sounded, leveled and measured on a free visit before any price is written.
100% satisfaction guaranteedA tile or stone we set that comes loose is ours to fix, and we return to reset it.
Family owned and operatedA family-owned local crew explains each layer of the repair, from the support to the grout line.

Call (904) 920-5495 Free Inspection

When a home inspector notes the hearth

An inspection report may note a hearth in a few words: cracked, undersized, or combustible material too close. Each note leads to a different repair, and a short note cannot say which. A crack may be a tile problem or a slab problem, while an undersized extension is a matter of measurement.

We read the note at the house in American Beach, measure and sound the hearth, and put the finding and the fix in writing that you can hand to the other side of the sale. You pay nothing for the visit, and the estimate lists each item on its own line.

American Beach lies within Nassau County. American Beach reaches the coastline.

From loose tile to a new slab

Sunken or tilted extensions leveled on new support
Inner hearth firebrick replaced in refractory mortar
Ash dump frames and lids reset or replaced
Factory-built hearth pads checked against the listing

Call (904) 920-5495 Free Inspection

Sound, measure, rebed, cure

Describe the hearth on the call
Cracked, hollow, sunken or too small, a short description sets up the free visit and what we bring.
Sounding and measuring
Each tile is tapped, the slab's level is read and the extension is measured against the opening.
Support first, surface second
A moving slab or missing support is fixed before tile or stone goes back on a full bed of the named mortar.
Cured before heat, then handed back
The bed cures before grout and fire, and we show you the finished edge and where the clear zone ends.

Rain at the flue top and stains on a hearth in American Beach

Wind-driven rain can enter an open flue top, and on a coastal chimney in American Beach the cap and its screen take that exposure first. Water that gets past them lands on the inner hearth.

When a hearth in American Beach shows staining at the back, we look up the flue before resetting anything, and the cap or top repair is written as its own line.

10% off any service booked within 72 hours of inspection

For your American Beach home, hearth work agreed within 72 hours of the visit comes 10% off.

Call (904) 920-5495 Free Inspection

Room for movement at the hearth's edges

Where a tiled hearth meets a wall, a raised platform or the firebox, a rigid grout joint has no room to move. Heating, cooling and settling push on that edge, and the tile or grout there cracks first. The movement joint guidance in the TCNA Handbook calls for soft joints where tile meets other materials and changes plane.

At a hearth the soft joint has to handle heat as well, so its filler is chosen for the temperature at that spot, and a joint beside the firebox stays noncombustible. We mark where the movement joints go on the sketch, so the next person does not grout over them.

Steel in the slab and the concrete over it

Hearths and extensions are built reinforced. Reinforcement helps only while it stays sound, and it stays sound while enough concrete covers it and water stays out. Thin cover near the top surface lets moisture reach the steel, and the rust that forms pushes the concrete off in flakes and pieces.

A patch over rusted steel fails from underneath, so the steel is exposed and cleaned or the slab is recast. We check cover depth where a crack lets us see it and write the finding down. A slab we pour gets its reinforcement placed with concrete cover on every side.

Stopping water before resetting tile

Stains and loose tile at the back of the extension, close to the opening, point up the flue. Water from an open top or a failed seal can run down the back wall of the firebox and across the inner hearth. Tile reset on a wet bed will not bond well.

The hearth estimate lists the water repair above as a separate line, with the source we found. We schedule the tile after the source is fixed and the bed has dried, which is sometimes a second visit. That wait is written down at the start, not sprung on you later, and the price does not change because of it.

Tile, slab, support and size, in writing

Hearth and extension measured against the opening size and R1001.10
Extension enlarged to code size, with support and joint detail shown
Flooring or trim inside the clear zone cut back, installer named
Cure time before the first fire, written with the finish date

Hearth repair questions from American Beach

Do you work on hearths for factory-built fireplaces?

Yes. We follow the unit's listing and manual for the pad size and material, and use listed products where the maker calls for them. Have the model number ready when you call if you can find it.

How does the guarantee apply to hearth work in American Beach?

It covers the work we quoted. If something we set on your hearth is not what we agreed, we return and fix it.